Need a driver side battery tray for an 88 GMC Sierra. Looking to relocate. Lemme know what you have. Thanks!
Need a driver side battery tray for an 88 GMC Sierra. Looking to relocate. Lemme know what you have. Thanks!
Just take your factory pass side one drill out the two spot welds and flip the bracket to use on drivers side works perfect mine is done like that looks factory .
what he said. i did the same thing. works great. doesnt cost a thing except a lil of your time
Like Tumbler in "Gone in 60" I'll drive anything with wheels or without
My 95 ECSB LQ9 build thread - http://www.ls1truck.com/forums/lsx-t...to-95-obs.html
CALI LEGAL ENGINE SWAP!
Stock 03 LQ9, DBW, 95' 4l80e w/ Transgo shift kit, 2010 50# GM injectors, 2800 Circle D stall, Spectre CAI, Upgraded trans cooler, Home-made E-fans/shroud, Dual EP-381 fuel pumps w/Home-made hotwire kit
NEXT ON LIST: Dual Battery setup, CAM/Valvetrain upgrade, Build my own rear mount turbo, TRU-TRAC, HIT THE STRIP!!!
You know I thought about that, but decided to look for one instead thinking they were easy to come by. Looks like I shall be doing it that way considering they sell for $60+ on eBay. Thanks guys!
Not sure if you are still looking for one but I got a factory battery tray for the drivers side that I can sell. I got it for the conversion and after rewiring, I moved the battery back to the passenger's side.
1994 Chevy C1500 RCSB 05' DBW 5.3 Conversion CompleteMy build
Coming soon ....... Full Repaint, 214/220 Cam, Yukon Posi with 3.73's, remove body lift
Posting Permissions
Reply With Quote