2003 work truck to pw and pl?

[carfreak07]

I have the door panels, switches, and door harnesses from a 2003 truck. Will the "work truck" body accomadate my harness once I install the power windows? Hoping someone has tackled this before and has some good info for me. I also have the bcm so may add the keyless entry to it as well! Thanks very much in advance!!

[Botlfed]

no, you need the bcm from the truck all that stuff came from or another truck with power windows, and where the doors plugs into have to be changed and the harness behind the dash also, I've done it several times and if you want a seemless install with no issues that's what you're gonna need. The bcm will hafta be changed and you can repin for the plugs under the dash if you don't wanna do all the other stuff I mentioned but its gonna be a pain in the ass if not.

[carfreak07]

I have the entire harness but it seemed like a ton of work when I took it out! I have the ntire dash harness and connections.

[Botlfed]

You can try it then but I've always had to have the bcm, its the black rectangular thin box under the dash, come on man its easy

[carfreak07]

I have the BCM........ I have everything, I am looking to Make this swap as easy as possible so what exactly is my best route?

[TRPLXL2]

You have everything you need absolutely, but I think you'd be crazy to rip that whole dash out!! My Colorado was all manual options as well, I bought the OEM parts door panels switches ex. Well when It really came down to it, I ended up going aftermarket kits for the windows and door locks. Much easier and they have been in my truck for 8 years so far, and I only have had to replace one door switch. I do understand the need for the oem look trust me, good luck with your swap!!!