What do i need for Ls6 intake swap??

[chvy=power]

Hey guys im getting the materials together to do the ls6 intake swap on my truck, but i am a little confused.
I'v been on the computer all day reading posts and what not trying to figure out what all i really need. The more
i read, the more i get confused. Do i need to get an ls1 water pump? will the pulley on the ls1 water pump work
or do i need to use the truck one? also where can i find an idler pulley relocation bracket? if there is any thing else
i need that i please let me know. Thanks for any advice!!!

[96/chevy/pu]

Theres a write up on the front page of the forum. yes you need a LS1 pump with a truck pulley or they sell spacers to put between pump & motor, as far as idler relocation, no just use a longer bolt in below the alternator and use some flat washers to space out idler, but if you read the thread on front page by Blue Cajun it tells you everything you need to know.

BB

[DBRODS]

A newer truck pump works nice and a 10mm x 150mm works to move the idler pulley below the alternator.. And yes your stock upper radiator hose will work

[bangbangskeetskeet]

A newer truck pump works nice and a 10mm x 150mm works to move the idler pulley below the alternator.. And yes your stock upper radiator hose will work

[skeet]

http://www.ls1truck.com/forums/front...take-swap.html

[chvy=power]

So can i use my stock fuel rails and injectors?