Allright, who has the hook up for me? My cam specs are 226/236 .525/.525 @110 lsa. Its a LS1 ASA cam. Kinda like a Hot cam. The yellow valve springs should be good enough for this lower lift cam. And I need 7.4 pushrods.
Valve springs and pushrods.
Allright, who has the hook up for me? My cam specs are 226/236 .525/.525 @110 lsa. Its a LS1 ASA cam. Kinda like a Hot cam. The yellow valve springs should be good enough for this lower lift cam. And I need 7.4 pushrods.
Last edited by ff_jeff; 06-29-2008 at 12:08 PM.
Jeff is that cam brand new? 0 miles on it? If so i would get new stuff..
Yes brand new. Thats Why I started this thread. See who has a hookup on that stuff.
Last time I checked they were $52.50 from SDParts.com for the springs. Stock pushrods can be used with the LS6 cam but hardened are preferred for high RPM agressive lift cam lobes such as the one you specified. Check their pricing out, also.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Posting Permissions
Reply With Quote
