04 LQ9 is in now the mods start....cam on a budget

[COWL327]

got the 6.0 tuned and its great but stock....Im thinkin about an 02 Z06 cam and springs would give it that little extra and its cheap but has anybody got any numbers on this and is it worth the time and effort?

[farmtruc]

wait till a sale comes up on a used cam, the 6L will want a bigger cam than a stock z06 one.

[skeet]

Worth time and effort? Imo NO not for the very little gains you might achieve. Like allen mentioned id wait it out and get the dual springs and push rods

[Frenchy]

Another +1, there's more and more 224s and 228's popping up in classifieds on all the sites about as cheap as LS6 cams. Everyone seems to be going massive.

[pl4yboy]

Another +1, there's more and more 224s and 228's popping up in classifieds on all the sites about as cheap as LS6 cams. Everyone seems to be going massive.

Dale is the king of massive cams. Original BDD cam guy here.

[Frenchy]

That's what is confusing about this thread.

[COWL327]

i tuned an 02 tahoe with a lq9 with a 224 cam and DAMN! that SOB pulls HARD!

[GraniteBlueNNBS]

Jons truck with the LS2 and a 228/230 cam pulled awesome.. DOnt put a smaller cam in ur 6.0 than most of us run in our 5.3's.... Im sure you have a big roller cam hanging around some place....

[Irby]

my buddy has a 6.0, untouched 243's, tbss intake, and a G5x3 and makes 440/445 rwhp in a 99 ecsb 3600stall and fully buitl 60e

G5x3 FTW

[GasGuzzler]

@ Dale

Don't do a ME cam.