So how is this fixed? I am having the same issue, truck is running fine but when you start driving it will not shift. Forward, reverse.... great. It will burn the tires off but will not shift. If it...
Type: Posts; User: Bear
So how is this fixed? I am having the same issue, truck is running fine but when you start driving it will not shift. Forward, reverse.... great. It will burn the tires off but will not shift. If it...
I bought a cheap one from Rock Auto for a 96 Vortec for $20.00. It left me on the side of the interstate and I had only put 1200 miles on it. Ended up buying a higher quality pump with a lifetime...
Same here, happy to help with any questions you have. I am in my wiring all the time adding extras so I am still pretty familiar with everything. I finally fixed all the little things this weekend...
I used an 05 engine and harness with an 03 transmission
Can be intimidating when first inquiring about it, but it turns out to be pretty easy once you commit. I have the same year and motor, had a blast doing the conversion.
Yes, it is behind the glove box. I pulled the pins, cut the wires and soldered them back to the pins, then reinstalled into the plug.
When I tested continuity I used this wire for my tach. I cannot speak for the 95. Sorry for the cheesy editing.
...
Found the diagram
http://i1049.photobucket.com/albums/s382/Tirebite/imagejpg1_zps86b3f48f.jpg
When I did my 94 swap, I removed every wire from under the hood because I was told nothing would be needed. It has been a year since I completed the swap and I have to fix dumb little things because...
Got it! I spent the extra money and bought a quality Airtex pump with a lifetime warranty. Took the bed off and dropped her in and presto! She's burning rubber again. I am still going to exchange the...
Bought a fuel pressure tester from harbor freight and hooked it up to the rail. Only got 5 psi when turning over the engine. Before I replace the pump, is there any safety feature that would disable...
I did use the stock unit but I replaced the actual pump with a 96 and newer for the high fuel pressure. I feel that it's the pump but I could be wrong. I am trying to located a pressure test kit so I...
The battery ended up not being the issue. I have rechecked the grounds. The computer is not putting out an codes which is inconvenient. I am going to see if I can find a pressure test to hook up to...
My truck died on the way to the lake. When I was going down the on ramp to merge onto the interstate, the engine fell on it face and would not accelerate. It made a weird thump sound when I tried to...
I had a digital battery charger hooked up to recharge the battery after draining it from trying to get it to start. The battery has 13.8 volt in it but the charger says it has an internal short in...
My truck died on the way to the lake. When I was going down the on ramp to merge onto the interstate, the engine fell on it face and would not accelerate. It made a weird thump sound when I tried to...
Did you get it to work? You never sent me back a text to let me know. If so, how's it running?
Thanks Art, haven't heard from you in a long time, I was wondering if you were still even on here. I got everything working except the temp gauge, it reads about 300 degrees. I was going to pick up a...
^Put an LS in anything, my neighbor has been watching my conversion and has decided to do his Ford Bronco with a 5.3. Go for it, you will definetly be happy with the end result.
That resistor did the trick. My tach works great now, now all I have to do is fix the temp sender so my guage will read correctly.
I am using the factory 05' 2 wire sender for the PCM and the factory 94' 2 wire for the instrument cluster. I am going to pick up the resistor at radioshack in the morning and will post the results.
We'll I got about 4 miles on her and no codes, everything seems to be running good. I got a scare from it when I looked down at my temperature gauge and saw it said 280! I checked the coolant with a...
Alright, the gauge is reading really high but my meter says it putting out 13.85, so I guess I am good. Got the loom finished and under the hood cleaned up. DIY cold air intake came out great and...
I was not saying change anything about the computer, I was refering to the signal generated by the computer may need to be made stronger. I believe I have found the fix.
...
Got the computer back and she runs great!!! I got a few questions though about it. What is the voltage output for a 2005'ish 5.3 setup. The guage in the cab is reading high, very high. Also, I have...