I am having the same or similar problem. I have a 2004 4.8L and The CEL is on for P0135 and P0155. Always both at the same time. I too have 12V power to sensor and the ground is good. Sensors...
Type: Posts; User: Safariwagon
I am having the same or similar problem. I have a 2004 4.8L and The CEL is on for P0135 and P0155. Always both at the same time. I too have 12V power to sensor and the ground is good. Sensors...
So I have my LS swap running, but I have a problem with the turn signal/back up light fuse. It works in key on position, but as soon as I turn the truck over to crank position to start it it blows...
Wow! didn't realize it would be on that side (passenger) I will try that. Thanks!
4.8L LS swap. I do have the line running to the booster. I have heard I need to hook up the original VSS wire. That may get rid of the light on the dash anyway. But the pedal is hard to push on...
The bottom left wire? Are you talking about the plug under the brake booster or the one on the passenger side of vehicle? (I thought that was HVAC stuff?) My plug under the booster has 2 white...
So I have got my 4.8L Ls swap running in my 1996 C1500. I removed the old PCM for the 4.3v6. I am wondering if I am missing something to get my brakes working properly now. A brake light is on in...
Thanks for the reply Farmtruc. I just got back from the Junk yard to look at some trucks for an education. I have 2 thick purple wires coming from the starter relay in the under hood fuse panel on...
So I am closing in on my 1996 4.8L LS swap. I have two 10 or 12 gauge purple wires coming from the under hood fuse box and it's labeled starter relay. One goes to the small post on the starter...
I am in the middle of my conversion to a 4.8L engine in my 1996 short box step side. I removed the old 4.3 V6 ECm and I still plan on using the v6 A/C (with Lextech's bracket) and the truck's...
I have a 1996 short box that formerly had 4.3 V6 that I am swapping to a 4.8 LS engine. I was going to swap the fuel pump over to the 87' Grand national for my 2004 4.8 engine. It has no return...
I have a 2004 4.8L engine i am swapping into my 1996 OBS truck. The engine has a cracked oil pan on it. I have a oil pan pick up tube and dip stick froma 2008 5.3 LC9 engine. Can I swap this onto...
I have heard Dirty Dingo mounts work well. I just made a deal to get rid of my daily driver 2012 Jeep Patriot (what a P.O.S.) so the $ I have left over from paying my loan off should more than take...
I am a little slow getting going here. Seems several places make the engine mounts. Looking to retain the factory A/C so I am checking into that. One thing I haven't been able to find much...
Thanks for the reply! I was beginning to think I wasn't going to receive much help. What motor ar eyou using? Is it an LC9? I was thinking of going for the Nelson wiring harness/Tune to simplify...
http://i61.photobucket.com/albums/h57/mremchn/103_1968_zps95d213f1.jpg New 5.3 Engine!
http://i61.photobucket.com/albums/h57/mremchn/103_1988_zps8a44c8d4.jpg Empty Engine bay!
Ok, I am under...
http://i61.photobucket.com/albums/h57/mremchn/103_1987_zpsca155a7d.jpghttp://i61.photobucket.com/albums/h57/mremchn/103_1986_zps01a3fd0b.jpg
Pics of the motor out, and bearing material in the...
http://i61.photobucket.com/albums/h57/mremchn/103_1991_zpsc499bfb0.jpg
http://i61.photobucket.com/albums/h57/mremchn/103_1990_zps290c78c9.jpg
Newbe here. I just picked up a 1996 reg. cab short box step side. :hyper2: Has a 4.3 with a bad cam.....so I've been told. I already have a 2008 LC9 I intended on using for another project, but it...