Hey guys. Anyone going this weekend 4/22, 23 or 24th ?
Type: Posts; User: droopyzda1
Hey guys. Anyone going this weekend 4/22, 23 or 24th ?
Hey guys, I need help getting the new R4 compressor working properly on my 5.3 swap in my obs. I used the original R4 bracket from the 4.3 that I modified. I have the new compressor installed with...
Sorry it took a while for me to reply. The box infront of pcm is a factory storage box GM has on some trucks. I actual use it to store the original bulky LS fuse/relay holder. I have one off a 98...
Thanks. Once I did the swap, I went back a couple months later and cleaned up the harness and other things. I have enough room in there now if I want to turbo it
Sorry. I actually got the pcm mounting bracket off It a 96 & up suburban.
Used one off an s10 or a blazer. Don't recall which one but it was a 1995 and model year
Oh I gotcha. Maybe it's a cheyenne series then ?
Thanks. I have seen a few w/t. It has only W/T decal on the tail gate. But I think it had to be one. It has rubber floor mat, Manual windows and locks, no power door locks, no tilt, no cruise. I...
Best thing do do is dump the old gas gussling 350 and tbi system altogether and do an LS swap. U can probably do it all for under $1000 or less. If u can find a donor vehicle it will make the swap...
Hey guys. Sorry for the long post but I just wanted to give an update about the swap I did a year after it has been done. I still have a few bugs to fix but otherwise here goes. The vehicle: 1994 ...
I did that swap last year to my 94 obs. you are only going to use a few wires from the obs harness to the 5.3 harness. Like power, ignition, fuel supply. Go to lt1swap.com and he has a step by...
I used ebay electric fans for my 5.3 swap in my 1994 obs. I trimmed the fan shroud a bit and retained the original V6 4.3 radiator. U can rewire the original uncut LS harness using the lt1swap.com ...
I have read this complete post. Have you tried testing the injectors? When I first test drove my obs with an '02 lm7 swap it was idling rough like if it had a mild cam. I could see it was hesitating...
Sorry. But don't know what you mean by slipping back. Possibly the belt is getting off the pulleys and coming loose? If so, than you may have to get larger pulleys to make some tension on the belt. ...
In my case it was a whole lot better than the old set up. The engine bay is quieter and less crap like a plastic shroud in the engine bay. I simply bought a couple generic universal electric fans off...
Just make sure you remove the complete harness uncut. If possible and u are removing it completely your self from the 6.0 truck, you can go as far as labeling everything as u unplug it. Just be...
Yep same here. I had to change the V6 to V8 frame mounts then used the dirty dingo mounts on the 5.3. When you remove the V6 mounts, its a 2 person job. One person can hold the nut with a swivel and...
I used Brendan from lt1swap.com to do a basic tune for my stock 5.3 in my obs. He Removed the vats and a basic performance tune for about $75. No issues and I have talked to him over the phone. He is...
I finished my swap a few weeks back of an '02 5.3 in my '94 obs. It was misfiring like crazy. Changed the plugs and wires. Still misfired. Check the coils with multimeter and all 8 were within...
That corolla is a great beater/daily driver for now. Just make sure u change that timing belt and water pump to be on the safe side. It's a toyota,it'll never die as long you maintain it.
Thanks. Will post some pics this weekend. Also, My alternator seems to be running hot. Within a few minutes of it running, the 5.3 alternator gets hot. I have one thick wire from the battery to the...
Sorry I have not posted recently. It was a rough few months for me and my family after my mom was not able to be treated any more from ovarian cancer and was set home with hospice care. She passed...
Sorry I have not posted recently. It was a rough few months for me and my family after my mom was not able to be treated any more from ovarian cancer and was set home with hospice care. She passed...
The speedo is electric and works. I connected it straight to the pcm. I used a free torque app on my phone and Bluetooth paired it with an obd2 connector and saw that my rpms do work. No codes have...
Here is the trans valve body pic:
http://i1218.photobucket.com/albums/dd402/Droopyzda1/HTC%20Evo%20and%20LTE%20pics/IMAG2334_zpsbef99ca9.jpg