:) GM Performance :: View topic - Don't know what to do with your old camshaft? Try this...
Type: Posts; User: agreif
:) GM Performance :: View topic - Don't know what to do with your old camshaft? Try this...
I had the same problem, horn was shorted out. Get a new horn advance/pep boys/napa/wherever to replace the one that's not working at and it'll solve your problem.
Bought these since I thought I needed them, but turned out it was my tire balance. $12 shipped.
http://home.nycap.rr.com/agreif/Truck/shims.jpg
sorry guys, taken 10min after I posted.
From an '07 6.0 engine. Otherwise I'm gonna toss it in the trash on Friday. Looks like it has some fuel injector plugs, and maybe a maf, alternator and TPS plug? Just pay for the shipping.
...
send an email to kdubbz, he's done the swap into a pre 03.
I've got one if you need one.
that's weird, they gave you a 4L80E harness with a 5.3? I don't believe the 80E ever went behind the 5.3 either. I trick to taking out that main trans plug is to get a hair dryer and heat up the...
no, plus will be the same between teh 60E and the 65E
yeah, check step 39 for the grounds.
4.8L to 6.0L Engine Swap for a 2001 Silverado
I'm a fan of my hankook ventus RH06
you could do the OBX with shortie magnagflow cats welded in place of the resonators.
Step 33. Remove 3 15mm bolts holding the flex plate and torque converter together. Use the hole you made with removing the starter.
http://bertok.us/agreif/engine/30_flex%20plate1_t.JPG...
Step 13
Take your steel piece and mark the holes and drill 1/4" holes. Then cut it to length. Do that for the other top bracket and then the bottom bracket. What I then did was attach the top...
Step 13
Install right and left differential side bearing caps and tighten bolts to the recommended torque specification (60-65 ft-lbs in my case). Using a magnetic base dial indicator re-check the...
ttt for today
Guys, I'm posting this for a friend who is selling his 2002 Corvette Convertible, 6 speed, HUD w/ 29kmi that was recently crashed. Would make a great project for someone. It runs and seems straight....
man, my settings got all screwed up and didn't know I was getting replies here! I think I have the fuel rails and coils tracked down. Shag, that looks near perfect, but I may have found a TB from...
Guys, selling my '01 4.8 to a buddy with a '01 4.3 in his Blazer, but since I took some parts off it for the 6.0 swap I'm looking for a couple things.
2 coil packs (2 were damaged on the 6.0 so I...
Engine swap in a 2001 Silverado
'01 4.8L to '07(classic) 6.0L
This is a step-by-step removal and replacement of the 4.8, 5.3 and 6.0L trucks. This is intended to be a guide and you should double...
Bigger pictures: Eaton Posi Install Instructions
Eaton Installation
OK, I decided to take on the Eaton install recently and, while the Eaton instruction were great, I felt there were a couple...
Full Size Pictures: LS1 Fan Installation
LS1 Fan Install
Thought since I always ask so many questions that I would throw together a little how-to to clear up any questions that may arise when...
talk to PSWired over on Pac-Audio forum. he's already done that swap. GM Performance :: Index Also has some info on his site. 1995 Chevrolet Silverado
Do you have any pictures of these? PM's are off by the way.
yeah, some 320.