Search:

it hesitates when first starting and i put it in gear, but when i gie it gas its stil does for a second then its fine.

i just bought a 01 tahoe with 133000 miles with a 5.3. its 4wd yada yada. it has 48psi fuel pressure on the rail (relief valve on passenger side) its supposed to have 55-62psi i believe. it drops to...

got my insurance check.......my choices are.....

94 Camaro Z28 Lt1...hunter green all stock

86 chevy flat black SWB with a 305......but ill have neough money to.....
harwood cowl hood
all...

im dropiing my truck off at frame shop this week sometime. they said $600 they could get it straiter than its ever been. then a buddy is ognna fix ther cab. so hopefully it turns out ok.

frame is bent a little and cab corners by back glass are creasedand bent in. guess im going to have to build another S10 with a 5.3 or 383 again.

i was driving, stopped at a stoplight saturday night. sat there for about 20 seconds when a drunk guiy in explorer nails me in ass at 50mph. then he left. he got locked up. no insurance etc. im...

I am looking for a factory chrome grille for my 96 Silverado. I also need a Bumper.

we used a cap we put a window in. The base of the ditributor was facing cylinder one, and we used a bore scope, pulled the plug and got top dead center on cylinder 1. we faced the rotor towards...

well we pulled distributors out of my truck last night and put a new one in it. Also got a new waterpump. My timing is supposed to be set at 0 degrees, but somehow we couldnt get it there and its a...

does this lower the rear of the truck any? if so how much? also will it cause a rougher ride than normal?

how lopey is the idle gonna be?

i have 275/55r20 and 3:42 gear. i have flowmater dual exhaust

Who knows about this Cam? lopy idle? performance? Stock L31 with exhaust is what its going in?

well me and my girlfriend were bored so we went and put gas in my truck at the local gas station. well then we decide to cruise down to the strip and see it dead cuz its cold out. well on our way...

i have a 96 silverado with the 5.7l L31. how hard is it to do a 0411 PCM Swap? what all goes into it? imn building a nice little motor but want more tuning ability.

anyone with a 88-98 OBS truck post pics up! im bout to do a 6.0 swap on mine after i can find a dang motor and tranny.

heres mine.....
http://i34.tinypic.com/23kx7pe.jpg

i fixed it. the cradle that held the fuel pump bent and it caused some pressure in and some out and it wasnt getting enough pressure nor fuel causing all the sensors to go nuts. thank god for...

p1351 is code its throwing.

i also checked cap and rotor and it was fine.

ts got 44-45psi fuel pressure still. people tell eme thats normal then some say 60-66psi is what it needs???? im not sure. one guy said it sounds like fuel presure regulator under upper intake. one...

ad gas could that cause that kind of thing?

it threw a tranny solenoid code and alos the fuel pressure is 40-44# idling and at throttle. still spitting and sputtering like crazy. any suggestions.

whats the pressure its spose to be at idle and at throttle? ill put a pressure gauge on it and see where im at, if the pressures are ok then i guess its plugs or the fuel?

well all i put that new fuel pump and scrrener in and a fuel filter 2 weeks ago, went and filled up today at Swifty gas and now truck runs like ****. if you jar down on it it spits spuuters shuts off...

how bout a photoshop