Have you send me a tune for this 03 :).
Type: Posts; User: Trick1
Have you send me a tune for this 03 :).
Hard anodizing.
Or built it out of stainless.
It's coming. The kit will be limited on max power.
Guess in the 400-450 range. Anything past that you then have to start upgrading parts.
Transmission etc.
12k for a budget build?
Was that...
Thanks for the props.
The end bill will depend in each person and final goal.
The kicker is most seem not happy with 400-450 in the turbo works and its so easy to up the power
7psi becomes 9 ,...
Yea. But you don't have to do those parts.
If you keep the horse power down.
I have many customers running on stock parts.
That are very happy.
Welcome to the boost.
A build Can be done way cheaper then. 8k.
Stay under 475-500hp the stock tranny will work but will need a shift kit and servo.
I can do a kit with injectors and a walbro...
I have a new set 8rib truck
Never had a belt rotated on them.
I did install them that's it.
600.00 obo plus shipping
940-781-5204
Rick
Countless hours of tape. Edited right could make guys that don't like each seem like best friends or friends seem like ememys.
Good edit.
I am asked all the time if I watch, or seen it? :)
Hope...
HP tuners
5.3L I would do the stage 3 upgraded to the 74/75 turbo.
Sorry I don't have the full write up on that customers ride.
Being a larger engine the stage 5 is a solid build. Plus we did some...
No not lean.
That's the boost psi on the display.
http://apicdn.viglink.com/api/click?format=go&key=b3e4915a2e6821bc2e294ccbb17ae64b&loc=http%3A%2F%2Fwww.performancetrucks.net%2Fforums%2Fforced-induction-159%2F50-120-mph-vid-520414%2F&out=http%3A%2F%...
Sucks for sure.
Any chance the fire extinguisher can over pressurize in a HOT car?
I know it gets freakishly hot here in the summer months.
From my nitrous CO. days, I know those can rupture...
Yea im lucky so far. :)
So far still starting every time.
Still over night it will bleed down to 20 psi or less.
BUT
Still fires off everytime.
Swapped regulator. So far so go. Starts all seems fine.
Wonder why though it would start even with psi in the rail???
I think I have a few rails around here.
I will take the trucks one apart.
And swap the parts around. (As long as the replace parts look on).
Hope that's it. I thought if psi was up I was...
Psi is steady while cranking and running. Just bleeds back when off.
So there's a check valve in the regulator?
The 03 Chevy I have for last 8 months worked great. Little 4.8 sings pretty nice.
A few weeks back it had a stumble issue that popped up at stop lights.
Then a starting issue.
Some times it...
Clean build Allen.
Once the line length is set. I can make STeel braided hoses.
Not a biggy.
The benefit is the lines are easily replaced if damaged and doesn't cost much and is easily routed.
On another Note....
http://www.youtube.com/watch?v=gq7uHtwathg
thanks to trick perfomance
first past on stage 3
-8 psi bust 7.92 1/8 89mph on early lift . you tube video type adawg 8219 .watch turbo street...
Low octane to begin with. 10-12 might not be a good idea.
Start low and flow a d walk up on it.
Otherwise it will be short lived.
Methanol helps if you have a heat issue or octane issue.
Most use it as a safety thing.
We sale the devils own kits. If your interested pm me.
Lots of things to look at.
Boost
How large the core is
Octane of fuel.
Meth injection adds octane.
But would take a good amount to drop air temps as low as an air/water core will with using...
Flow master in your sig. Needs to go away for the turbo build.
Go with a straight Perf core design.