Got one too!
Type: Posts; User: country_3030
Got one too!
I have gotten to where I keep up with a lot of the guys on Facebook and not on here. Definitely agree with the growing up and not being able to play as much with toys. House payment and bills are now...
I go through the for sale threads but thats about it. Have been working on my old 79 4x4 getting it ready for a 5.3
http://i1293.photobucket.com/albums/b591/Aaron_Clay/IMG_20141002_142441_976_zps4c7e4b4a.jpg
http://i1293.photobucket.com/albums/b591/Aaron_Clay/IMG_20141002_142451_804_zpsc38c3e4c.jpg...
I have a new fast 90 intake. It was a display model so it has no brass inserts installed. I have all the gaskets, bolts, and brass inserts for fuel rail bolts. Will post pictures later today. I can...
Trailblazer convertor for sale $250 OBO. Bought new from Paris Chevrolet, used for 18,000mi. Stalled to 2600rpm behind my iron ls1. Went to a bigger cam and convertor. Will be in DFW area all next...
Will need to swap rods and crank to do this.
Okay, I had some more time to read through the P1810 diag tree. It states that if the pressure manifold looses its ground. Then the computer sees that the transmission is in 2nd gear. When this does...
Have not posted here in a while but I really need some advice, help, or confirmation of what I am thinking.
Customer of mine brought me a 2000 Silverado 2500 with a 5.3 and 4L60E with a badly...
Sounds good to me. I just need to finish the trans rebuild and then it is on.
Just like the title says I need a 5.3 crank pulley and a starter. Will need them shipped to 75462 unless you are close. These are going on my budget engine swap in my old 79 4x4. Don't need to be...
I need a crank pulley shipped to 75462 if you have one
I called around and got him hooked up with MJ Engineering and Performance in Sterling, MA. About 3 hours from his house.
Do you know of anyone closer or any good stories about MJ?
I have customer of mine with a 2008 corvette. He needs a good live tune to fix an idle issue. I am not able to go to Schuylerville, NY 12871. If anyone knows of a good tuner in the area I would...
Importthis and I both run them. Work great. Just make sure all the grounds are really clean and good connections.
How much for all the A/C stuff and the cruise control module? Shipped to 75462
Can be hard to get it to stay at TDC once aired up. Have had my compressor turn the crank and put the piston at BDC before. Also have had the valve stem seal catch a valve once before. Got lucky on...
Got my new cam put in and that fixed the low timing I was having to run. Truck runs really strong and will easily smoke the tires when it shifts into second in two wheel drive. This think turned out...
http://www.ls1truck.com/upload/files/511/Complete_thumb.jpg
The reason I asked about miles is... My 5.3 that I pulled out of my 99 had up to 3-4° of knock on the stock tune. I found the pistons to be quiet loose in the bores at 160,000 miles. I attributed the...
How many miles are on the motor?
Looks to tight of bearing clearance to me. Did you do it with the crank and bearing dry or oiled?
I am going to try researching this further. Will update with more info if I find anything out.
Was talking to my dad today about getting his old car back on the street for him. 1972 Dodge Dart
Anyways he was talking about what he had done to the car back when he use to race it. One thing...
I would like a 2X in the (LS1Truck.com GM Truck Community). PM total me for PayPal