When I took the fuse box cover off on my '99NBS, there is a connector attached to the engine side of the fuse box, but left open. Any idea what this is for?
Type: Posts; User: downtown
When I took the fuse box cover off on my '99NBS, there is a connector attached to the engine side of the fuse box, but left open. Any idea what this is for?
I'm installing power seats and center console in my '99 NBS. I'm not sure what year truck the seats are from and so far have found a connector that will work for the driver's side, but not the...
What about the rear suspension?
Are the front end parts (bumper, grill, etc.) the same on both trucks?
What are the differences between a 1500 and a 1500HD? How about a 2500 and 2500HD?
<div class='quotetop'>QUOTE(Gabe @ Aug 9 2006, 05:45 PM) 60613</div>
I replaced the stock plugs in my 5.3 at 140K with NGK's and felt a difference. Don't know if it was the age of the other...
I just replaced my alternator because of it squelling.
<div class='quotetop'>QUOTE(TXcrew @ Jun 23 2006, 09:19 PM) 56134</div>
Sorry about the blank reply.
Dental floss. Just get it started behind the emblem and work down. You will probably break...
I have a set of power seats for my '99 ECSB that I got from a boneyard and am looking for help getting power to them. From the factory it looks like the connectors come from the harness running down...
I have a '99 NBS Extended Cab and have found some power seats and center console fom a later model truck. It looks like the wiring on trucks that come with power seats come from the harness running...
The message was off this morning when I went to work. It has never done this before. Thanks for the help.
I changed the oil in my '99 Silverado with a 5.3 tonight and the Check Engine Oil Level came on. I put in 6 quarts like alway, no leaks. Level is fine (Ichecked it 3 times). Any suggestions? The...
Will these bolt right up to a '99 Silverado? Any advantage over stock? I haven't compared them to see if they are any different.
Through some swapping I have ended up with an LS1 shortblock and tranny. I also have a set 5.3 heads, intake, injectors, etc. How much trouble would this be to put in my 5.3 powered '99 ECSB (or...
I am looking to move the MAF. My understanding is the closer to the TB the MAF is, the better. Don't know of any specific HP increase from it, maybe just more accurate info for the ECM.
Thanks...
Does GM or anybody else make an extention harness for the MAF on a 5.3? I know GM makes one for the LT1.
Thanks
Kenny Brown