X2 I installed a 6.0 in my '57 Chevy truck... So long as you have a dbw harness it's fairly straight forward.
Type: Posts; User: Hammer Head
X2 I installed a 6.0 in my '57 Chevy truck... So long as you have a dbw harness it's fairly straight forward.
Hey guys, got an '04 Silverado 2wd 6 lug and interested in upgrading/ converting to bigger brakes. I have a hydroboost planned so that's not an issue.. what I want to know is if the 2017 caliper...
Has anyone swapped a front sway bar from a 3500 (36.2mm) in place of the 1500 (34mm) front sway bar? I've seen only one other person swap in the rear sway bar from a Suburban to stiffen up the rear...
Sure do.. the Wilwoods, right?
Thanks. That should be helpful.
I didn't seem to find the info I was looking for. All the pix were X'ed out. I was hoping to find something like this..
1 2 3 4
8 7 6 5
1 = lights
2 = oil pressure
..etc.
I'd be swapping in the '92-94 cluster so I'd need the pin out to that.
Hey guys, I'm looking for the pin-out on the '88-'94 fullsize truck cluster. I got hold of a '92 S10 blazer & I'm trying to find some info so I can swap in the 1500/suburban/K5 cluster w/ tach. I've...
I finally got the 4.8. Are you willing to pay the shipping from Chicago or would rather do the local deals?
Hey guys, I'm looking for a gauge/ instrument cluster from a '92-'94 Suburban/Yukon/K5 Blazer/1500. Must have the tach! I'm working on a new project ('92 S10 blazer w/ a 4.3 & a manual trans) & want...
I'm selling an electric ford taurus fan.. pulls 3-4K cfm of air.
http://www.ls1truck.com/forums/sale-parts-vehicles/15031-little-bit-everything.html
I should have one by the middle to end of next month after I go get a 4.8 from up in WI.
Welcome
Welcome
Welcome
Welcome
Welcome
Welcome
It'll work so long as it's a T56 from another LSx. LT1 T56s have different bellhousing depths.
What gears you should be running depend on what kind of drivetrain, power & use your truck is going to see.. I'm sure a little more info would benefit us all in helping you out.
Z06 cam. You can find them on Ebay used for 75-150.. way cheaper than a custom grind & they're a great all around cam. 'Specially on the street. They mellow out a little in a 6.0. In a 5.3 they're on...
What about running the wires under the manifold? You'd still need to trim the covers to fit the truck intake.
Imo, stick w/ the AC Delcos. I've used other plugs & everything else is crap & over priced crap compared to the ACDs
I have a little S10 & I've got 315/35-17s in the back w/ lakewood traction bars. My rear is a Zexel Torsen posi from an LS1 camaro.. I'm sure since your truck weighs more you should be fine but w/...
Useful tips.. any pix of these headers? Installed?