Search:

Type: Posts; User: jplowman2005

Search: Search took 0.01 seconds.

  1. help figuring out what 6.0/80e 4wd 2001 1500 is worth

    ok so im trying to figure out what a good price to list my truck for sale would be but i dont know where to start.. its a 2001 silverado 1500 4x4 std cab long bed..its a base work truck with manual...
  2. Replies
    4
    Views
    936

    good to hear, like i said i havent drove it since...

    good to hear, like i said i havent drove it since its been cold so i have nothing to compare to.. i also noticed that until it gets abot half way to warm it dosent really move from the 35psi when the...
  3. Replies
    4
    Views
    936

    i changed the oil on it about 400 miles before...

    i changed the oil on it about 400 miles before this happened and now it has 4qts of fresh oil so its manily new, i run castrol 5w-30 with a wix filter. i plan on getting the block off plate if i can...
  4. Replies
    4
    Views
    936

    oil pressure or pump help

    ok so i have a 01 1500 with a 6.0/80e swap... its been in the truck and running great for about 4 months, the 6.0 has a factory oil cooler and the people that pulled it from the 2500 cut the lines...
  5. Replies
    4
    Views
    1,567

    yes im wanting to say my tires are 31.5 or 32...

    yes im wanting to say my tires are 31.5 or 32 inches tall, there stock rims tires off a 2010 suburban.. it just seemed like this trannys overall rpm was higher than with my 60e, but would make since...
  6. Replies
    4
    Views
    1,567

    gear ratio swap help

    i swapped a 6.0 and 80e in my truck a few months back, all has been great thanks to stickys and advice on here.. anyways my truck has 4.10 gears and the front end is needing rebuilt due to the outer...
  7. Replies
    17
    Views
    2,093

    i have this same problem every now and then.....

    i have this same problem every now and then.. mostly when turning into a parking spot about half way in when im getting close to the car in the next spot..although i have 266k on mine so im shure its...
  8. Replies
    3
    Views
    793

    well the grounds were good and tight.. with the...

    well the grounds were good and tight.. with the truck runnng and a/c on but comressor not working i took a hammer and turned the compressor some and boom it came on... turned off then back on and i...
  9. Replies
    3
    Views
    793

    weird a/c prob after motor swap

    ok so i just finished my 6.0 swap in my 01 1500 4x4.. the air worked great before the swap with never a problem... i left everything conneceted to the truck so nothings changed with te charge...
  10. Replies
    12
    Views
    2,223

    i just ordered a conversion joint from my local...

    i just ordered a conversion joint from my local shop, they couldent get a spicer and the only one they could get was a neapco greasable i believe, ill post the number up fr future reference... also...
  11. i left the tranny on as well and got it in this...

    i left the tranny on as well and got it in this weekend.. only cleareces issuses were the front diff hitting the oil pan, and i had to remove the intake manifold
  12. Replies
    12
    Views
    2,223

    so would the yoke be the same? i figured since...

    so would the yoke be the same? i figured since the rear end was bigger on the hd that it would be different... i can get the yoke for free from the guy i got the parts from, he still has the rear end...
  13. Replies
    12
    Views
    2,223

    u joint help

    im in the process of a 6.0/80e swap in my 1500 silverado.. i have a 2500hd driveshaft that is the right length but on the gear end the u joint is bigger than whats coming out of my rear end.. not...
  14. kool thanks alot anything that helps save time im...

    kool thanks alot anything that helps save time im all for.. know i need to decide what all im going to replace while its out, im thinking plugs, trans filter, drivesaft seal, and u joints.. any...
  15. the engine tranny and trasfer case i bought were...

    the engine tranny and trasfer case i bought were all still bolted together and pulled out at one time so the only way i was assuming that being done is if the cab was taken off... i didnt know if it...
  16. easiest way to swap engine, tranny, and transfer case still bolted together

    i picked up my 6.0 swap still connected its 4l80e, and transfer case.. the truck it was on was wrecked and the pulled the body off, how hard is that to do seems like the motor would be a piece of...
  17. Replies
    3
    Views
    1,263

    thanks, i do all my own mechanic work as ive been...

    thanks, i do all my own mechanic work as ive been in the honda scene since i was 16 (im 25 now) making my own turbo kits, engine swaps etc, so ill be able to do the swap i just need to know all the...
  18. Replies
    0
    Views
    657

    few 4.8 to 6.0 questions

    i have a 01 4.8 4x4 ls work truck silverado with manual transfer case and im picking up a 2002 6.0 out of a sierra tommorow with a 4l80e and matching transfer case with 79k... i plan on swapping it...
  19. Replies
    3
    Views
    1,263

    newb from southern indiana

    im new here, from southern indiana about 5 miles from lousivlle ky... i have a 2001 standard cab long bed 4x4 with a 4.8, has 266k on it and runs like a champ without a trailer that is... thats why...
Results 1 to 19 of 19