OK am a little confused I've had several people tell me conflicting answers.
If I got a segment swap down on a 4l80e would the trans shift like normal or would it still not shift right tell after...
Type: Posts; User: LQ4-TURBO
OK am a little confused I've had several people tell me conflicting answers.
If I got a segment swap down on a 4l80e would the trans shift like normal or would it still not shift right tell after...
2000 Gmc sierra
I'm not home right now but I believe its an SE model
Its got an 6.0 and 4l80e swap
From all the research I've been reading with the codes I have, I think its the ignition...
Well I checked the ignition fuse and circuit 1020 but they where both good I also checked the trans pump and it was good. When I checked for circuit 1020 I pulled the ignition fuse and tested for...
Well I've been doing a little research on my various codes and several places that I have read are saying that it could be the IGNITION SWITCH?
"The most likely cause of this condition may be a...
I swaped to a 4l80e and I checked my truck for codes because when I went to put in gear the the gear selecter on the dash said it was in reverse but the truck wanted to move forward but not much even...
I have for sale or trade some parts... In trade I'm looking for valve cover breather kit.
First thing is a 4l80e flex plate, spacer and bolts BRAND NEW! I ended up not needing it. The bolts came...
I'm in the process of finishing up my 4l80e swap but I need a to figure out what to do on the HD file segment?
As of right now the 80e trans is in and I purchased the Speartech wire harness...
I ordered my fans off eBay and they where from an F-body and I order the wiring harness from Nelson Performance very nice piece simple install. Done and done!
Never is enough time for mods but I still manage to make time...!:smile:
Thanks pretty simple and to the point, thanks! I'll to look into the -12 fittings and a catch can. Farmtruc I sent you a pm.
Well the converter was NOT seated all the way I talked to Chris from Circle D and he told me that the converter pads to trans mount to block needs to be an 1"; so that told me with no uncertainty...
Don't have experience with Yank but Circle D will take care of you.
How can I post pictures?
I would like to say that I'm not bashing the company that I bought the converter from. This is the second converter I bought from them, first one was flawless. This one being a different...
I ordered a converter for my 4l80e and filled out all the correct stuff in addition I filled out in the (comments) that I was getting a 4l80e flexplate flat with spacer. When the converter arrived I...
To put it simple the converter into trans is all the way in. The converter side that connects to the flexplate are touching and the center hub of the converter is in the center of the flexplate but...
I believe the snout of the converter just goes into the pump just enough to keep it center? Hopefully somebody can chime in but if all else fells I can cut the snout not sure how much? Or get a flat...
Thanks for the link. From what I read it's telling me that I can use my dished 4l60e dish flex plate with a spacer mounted on the outside of the flex to help Center the torque converter hub?
This...
I need to buy a 4l60e flat flexplate to mount my 4l80e to my lq4 am uses a ls1 style converter 3 bolts.
I can't find one new there all dished.
Thanks
I appreciate the reply and I will take a look but I did not mess with the pump gears when I took the pump out and took the two half's apart I left the half with the gears alone. The only thing I can...
Very nice color! Tease us some more with an entire shot of the truck?
I ordered a torque converter for my 4l80e ls1 style but the torque converter snout bottoms out against the pump seal of the transmission. With the converter snout bottomed all the way down to the...
I have Tricks turbo kit on my truck but it doesn't really leave room for a breather coming out of the oil cap. What are you guys doing? I don't need anything fancy just something to get the job done....
I ended up ordering a different one Viper 4204 2-way Remote Start System. Hopefully I made a good choice.
I'm in need of a new keyless entry and I won't to go ahead and get a remote start and keyless entry all in one. I found a refurbished one ebay model #4103XV and I would like to buy but it says...