Search:

Type: Posts; User: gagliano7

Page 1 of 5 1 2 3 4

Search: Search took 0.04 seconds.

  1. Replies
    4
    Views
    1,480

    Pin 55 on red connector if your using a truck pcm...

    Pin 55 on red connector if your using a truck pcm connects to pressure switch. You can do a quick test by grounding pin 55 so it works. The a/c request won't work until pin 55 is grounded or when...
  2. Replies
    3
    Views
    950

    Cam sensor on the 4.8 is behind the intake...

    Cam sensor on the 4.8 is behind the intake manifold. On the 6.0 with the 58x the cam sensor is on the timing cover. I think the knock sensors are different also.
  3. I did the exact same thing been working since...

    I did the exact same thing been working since 2011.
  4. Replies
    30
    Views
    47,812

    As long as you don't have the 1999-2000 6.0 with...

    As long as you don't have the 1999-2000 6.0 with the long crank yours will bolt right up.
  5. Replies
    4
    Views
    1,609

    Your fuel gauge works off your tank and gauge....

    Your fuel gauge works off your tank and gauge. New engine has no effect on that. Just hook up wires from old starter the same way to the 6.0 starter. I would get an adapter so your 1995 oil pressure...
  6. Replies
    3
    Views
    920

    Make sure all your grounds are connected. Usually...

    Make sure all your grounds are connected. Usually is the cause of this problem.
  7. Replies
    9
    Views
    2,924

    http://www.gmpartseast.com/chevy/components/2004-s...

    http://www.gmpartseast.com/chevy/components/2004-silverado-1500-2wd-new-style_engine-asm-v8-cylinder-block-tc00605x0100-lr4m96c15543.html

    Check here
  8. Replies
    2
    Views
    905

    Thanks I had a feeling I would need to raise...

    Thanks I had a feeling I would need to raise engine.
  9. Replies
    3
    Views
    1,393

    The dirty dingo's have some adjustment to them....

    The dirty dingo's have some adjustment to them. On my swap I located them in the same location as my old 350 so all my driveline stuff hooked up correctly. I have Schoenfeld long tube headers.
  10. Replies
    9
    Views
    2,924

    Probably won't help much but I have a 1992 2wd...

    Probably won't help much but I have a 1992 2wd with a 5 speed(newer trans) and the internal slave. I used the nfw 1050 flywheel with a 4.8 1500 clutch setup from LUK.
  11. Replies
    2
    Views
    905

    Oil pan removal

    I have a 1992 chevy pickup 2wd with a 5.3 swap. I was wondering if anyone has changed there oil pan(truck oil pan)while motor was in truck? I just want to know if there is room to change pan and get...
  12. Replies
    7
    Views
    3,833

    Not the best picture. Click on for a better view.

    Not the best picture. Click on for a better view.
  13. Replies
    3
    Views
    2,312

    I am using the same setup but I wired in the a/c...

    I am using the same setup but I wired in the a/c request and I also had to wire a ground to the 1999 pcm red 55 so it thought it had pressure in system. Mine idles up when ever I run the a/c
  14. Replies
    5
    Views
    2,637

    Same here. My truck is also lowered. Do you have...

    Same here. My truck is also lowered. Do you have the motor to far back?
  15. Replies
    53
    Views
    10,866

    https://www.holley.com/products/ls_power/ls_exhaus...

    https://www.holley.com/products/ls_power/ls_exhaust/ls_headers/ These are for the 73-87 trucks but I would think the would fit the 88-98
  16. I like the fuel door idea. Even though it isn't...

    I like the fuel door idea. Even though it isn't to bad to pickup the bed that still makes it a lot easier.
  17. Replies
    12
    Views
    2,141

    What fuel system are you plumbed for return style...

    What fuel system are you plumbed for return style or returnless? What kind of regulator are you running? I had my hose come loose on pump in my tank and only had 20 psi and motor still ran fine at...
  18. Replies
    6
    Views
    1,499

    On my 1992 I used the 1992 radiator. I had zero...

    On my 1992 I used the 1992 radiator. I had zero issues with the clutch fan. About a year ago I put a 16in electric fan with a shroud and I also have a/c but I am a manual 5speed. My temp never goes...
  19. Replies
    9
    Views
    1,689

    http://www.highflowfuel.com/i-4783523-hfp-255lph-f...

    http://www.highflowfuel.com/i-4783523-hfp-255lph-fuel-pump-chevrolet-c1500-pickup-1988-1995.html Here is the one I used 3 years and counting plus it is good to around 500 hp.
  20. Replies
    3
    Views
    1,029

    The 6.0 and 5.3 are ls engines. I would check the...

    The 6.0 and 5.3 are ls engines. I would check the performance modification forum http://www.ls1truck.com/forums/performance-modifications/
  21. Replies
    2
    Views
    990

    73-87 swap exhaust system

    I figure people here would want to know hooker is coming out with.

    http://ls1tech.com/forums/conversions-hybrids/1762346-new-hooker-73-87-gm-truck-ls-swap-system-preview.html
  22. Replies
    13
    Views
    3,618

    Cool thanks!!

    Cool thanks!!
  23. Replies
    93
    Views
    23,121

    On my 2wd truck it sits about an inch and a half...

    On my 2wd truck it sits about an inch and a half below front crossmember.
  24. Replies
    13
    Views
    3,618

    What did you use for the pcm bracket?

    What did you use for the pcm bracket?
  25. Replies
    182
    Views
    60,360

    The 2002 Camaro pcm is the 411 pcm.

    The 2002 Camaro pcm is the 411 pcm.
Results 1 to 25 of 120
Page 1 of 5 1 2 3 4