Hi, it turned out great! Im very pleased with it, i used a sachs flywheel and a stock to my original setup clutch plus a pilot bearing from napa that i found a part # for by searching through this...
Type: Posts; User: Homer ak 94
Hi, it turned out great! Im very pleased with it, i used a sachs flywheel and a stock to my original setup clutch plus a pilot bearing from napa that i found a part # for by searching through this...
Timing was all over the place bad tune we flashed my spare ecm all good now
I have a guy coming over with hp tuners today, hope its something obvious
My swap on a 93gmc with a 99 5.3 is nearly done, truck starts and idles fine but won't rev past 1500rpm? Then it starts to surge during idle, any ideas where to start been working on and off of it...
I just finished my 5.3 into a 1993 sierra by combing through these old post, everything is here good luck
Just comb through the threads that's what I did it's all here
2000 5.3 into a '93 GMC Sierra, 4x4 with nv3500 I'm almost done kinda hung up on fuel lines in Alaska where I live I have to order everything if anyone has advice or part #s, I'm 80% done
I have a 93 Sierra NV 3500 4 x 4 I'm putting a 2000 5.3 in I have everything bolted up with the parts I ordered just want to double-check before I throw it in 1050 flywheel 1377 C throw out bearing...
My 5.3 is a 99 do I need to keep this fuel Vapor canister for my setup what about the lines thanks