A x-pipe will get rid of that glasspack sound and also help quiet it down alittle. If its still to loud, you can put a bullet infront of each muffler.
Type: Posts; User: BLK6.0HD
A x-pipe will get rid of that glasspack sound and also help quiet it down alittle. If its still to loud, you can put a bullet infront of each muffler.
Are you using a x-pipe in your dual setup?
If you had some good tires, and it hooked. I bet it could drop you into the 13's.
I have a run setup this weekend with a WS6. i have ran this guy from a 20mph roll and at 90 he only had me by a fender. He wants to do it again for some $, so im going to put the bottle back on for...
the trans is stock other than a shift kit, and for a stall im running a tci streetfighter. i can stall it to 3500.
I put a 1gal jaz fuel cell where the air box should be. Out of the cell, i have -8 line, going to a holley blue pump. From the pump to the regulator is also -8 and from the reg set at 6psi to the...
Yep stock rod bolts as with everything else. Spinning 7k launching on the bottle and through the shifts. The cylinders still look like the did new. this just shows how good our motors are. After...
Im running a seperate fuel system for the nitrous, so i dont need to worry about going lean. I have voltage meters hooked up to the o2's so i can see if its running lean or rich while im on the...
Im spaying 125 to each nozzle now. Lastime at the track is was running a 175 shot and no bottle pressure 600psi, and went 12.30 @ 108. Im thinking of bumping it up to 150 on each side.
Here a some pics of my truck and the nitrous setup. http://img42.exs.cx/img42/1163/100_0602.th.jpg http://img33.exs.cx/img33/2535/100_645.th.jpg
On the way home tonight i got next to a brand new sti, still had the dealer plates. When we took off from the light, i wasnt shure if he was going to get on it or not. Well then he hits it and jumps...
That 4l80 will be fine with 0 tm. If you do anything to it just put in a shift kit.
Hey Allen, are you going to be in Burbank in Los Angeles or Burbank Santa Clara. If your going to be Santa Clara, lets get together and do some tuning.
I will be there. Cant wait to beat on some cars. I raised my truck up and put on 35's, so its a real sleeper now.
What air pressure are you running in them. How long of a burnout are you doing?
2 nozzles, @ .053,you aint skeert :thumb:
1.6 60' times .... WOW [/quote]
Its only alittle over a 250 shot :laugh: If it blows, i will just give me a reason to build a 408 :smile: .
Its about 5400lbs maybe alittle less since i have pulled everything off that i could. The 12.70 was ok for how it was running :puke: . The next time it goes to the track it will be in the 11's.
Its a ext. cab short bed 4x4.
I will see if i can find the slip and post it. The problem with it falling on its face, was that i was trying to spray to much through a single nozzle. The port in the nozzle for the nitrous side is...
Here is a calculator for the guys running nitrous. I called nos and the jets they say to use are the same as the calculator comes up with. It also shows what hp your getting to the tires. ...
Well i went to the track lastnight and got in two runs. It fell on its face when i went into 2nd, and stayed that way the rest of the track.
12.70@105 1/4
1.690 60ft
7.68@90 1/8
Before i...
For the stall, im using a tci streetfighter. I can stall it to 3500 on the motor. Driving around town, you dont even know the higher stall is in it.
The trans is a stock 4l80, except with a tci shift kit. As far a towing, i use it alot during the summer taking my nova to the drags. Even with the stall the trans only gets to 180 towing around...
Yeah 7000 with stock internals :eek: . I spray it threw the shifts and have no problems.
Thanks Allen. His main excuse was that he was not in the correct element :nutz: .