Search:

The truck is quite fun now, I really don't drive it that often but when I do there is always a smile on my face!

I haven't posted much since my trans went out. Well got that all fixed added a yank 3600 since I got a smoking deal on a brand new unit. Here is a very quick video of a 30mph roll....

Pushrods, springs are required, Keep in mind that sounding fast and being fast are 2 different things unless your are willing to go all the way with other supporting mods (stall, Gears) You are...

Custom ground version of Comp 54-450-11 which is 206/212 @.050, Have it ground at 112LSA and you could even add few degrees of center line advance. It would sound good and actually make power without...

http://farm8.staticflickr.com/7444/9507409374_ace7eef439_z.jpg
Untitled by Badger009er, on Flickr

http://farm6.staticflickr.com/5477/9349383122_dc398083c2_z.jpg
Untitled by Badger009er, on...

Man I can help you out but I dont have the wiring diagrams with me at work. I just went through all this and the MLPS/ PNP/ PRNDL what every you want to call it has 4 wires that you are well aware...

Well the truck is about done, I got the new Chevy performance transmission in which was a bit of a nightmare due to lack of information about the product. Had to convert my internal MLPS system over...

Looking for just the connector that goes into neutral safety switch mlps with as much wire lead you can cut off for me. I need the single connector style. Thanks!

Lets say I can get a smokin deal on it. Well under 2k through a friend.

I know the 70e is not indestructible, GM rates this at 495tq which my 4.8 is no where near. Stock 60 with servo and tune held up quite well until the tcc issue then me unclipping the shift solenoids...

I need to take a video so that yall can see what I'm talking about. Chevy performace just came out with a 4x4 4l70 which is the option Im gonna go.

Features:

• 13 vane pump with a...

I read through the GMT900 post and it was never stated how the 4x4 swap went. I know the 4l80 has a 32 spline output and the nnbs has a new style mp1222 transfer case with 27 spline input. Do I get a...

Well I found out that wiggling the pan onto the trans to when I swapped out the tcc solenoid I half unclipped shift solenoids. 3/4 are slipping bad so looks like Im pulling the trans out. I...

Maybe someone else here can answer this. I called np few days ago and haven't got a reply yet. I'm sure they're busy in the shop. So triying to diagnosis this thing I went out to my buddies shop to...

Thanks for the reply. I have considered pulling the cam/ valve train since I could ruin the warranty on the new one my first weekend.

Welcome to the board.

So I found a crew cab 4x4 6.2 truck and just started talking to the dealer. They are out of states so most of the stuff is being done via email. How have the dealers reacted to those of you trading...

Filter and fluid was clean.

I think it may be the converter but looking for but would like some opinions before I drop the cash on a new stall and do the labor. From what I understand there are 2 TCC solenoids in the...

Thanks for the replies, I am hoping its not the converter since that is more expensive and more work for me to do. I picked up the PWM TCC valve last week and I'm going to throw that in maybe tonight...

Did you ever find out how to solve the 4l80e 4x4 swap? My truck has the manual shift transfer case and I have been thinking about getting Rossler built 60e or doing the 80 swap if I know what trans...

The only 2 codes are p0700 and the P0741. I had a cooler line blow off about 2k miles ago, pulled the pan check for grit and changed the filter. When putting it back together I converted to stainless...

Here is a little back story for my 4l60e. Truck has about 30k on it now and last fall I did a cam swap and sent the pcm to get tuned. When I got some seat time I noticed the lock up couldn't make up...

Alright, thanks for the input looks like I will be going LY6

Wasn't sure if Allen could do something oh hpt yet