1986 LT250R Quadracer
ENGINE PARTS REPLACED
Bored to 1.00mm over
Wiseco Top End
Versah Connecting Rod Kit
Crank Bearings and Seals
Boyseen Reeds
38mm Keihin Race Carb w/twist throttle kit
Uni Air Filter
Shifter
Kick Starter
CHASSIS PARTS REPLACED
Swing Arm Skid Plate
Swing Arm Bearings
Linkage Bearings
Carrier Bearings and seals
Rear Tires
Front Tires
Newer Style Seat
EXTRA PARTS
2 Boreable Jugs
2 Heads
1 Rough Set of cases with crank and tranny
1 Airbox
2 Rear Shocks (need rebuilt)
2 Front Shocks (bad bushings)
2 Straight upper A-Arms
2 Straight Lower A-Arms
Stock Carb
Front Fender (Cut)
THE BAD:
Some of the Cosmetics. Previous owner painted plastics. I have most of the paint off the rear fender but still needs some attention. There is a small crack also on the rear fender. Front fender is a newer fender (Uncut) but is faded as the plastic is old.
The wiring was also hacked by the previous owner. I replaced a few of the wires. It runs fine and works as should off of the kill switch. Would need to put connectors on to run a headlight.
This machine is all new mechanical and chassis. Just has a few cosmetic flaws.
I am pretty firm on the price due to all the extras. But money talks.
Will deliver up to 100 miles, just buy me a beer or two.
Reply With Quote
Originally Posted by tanz45
