Dynatech

i usually don't do this but i think i've been very patient. i had a 2000 ls1 harness that i was going to sell to dynatech. but instead, we worked out a trade. i needed an adjustable fuel pressure regulator and a VATS bypass module for my swap. i shipped my package to him around november 10th. i know he received it because ups showed that he signed for it. it is now december 20th and i have yet to receive my parts. at first, he said he shipped it but he couldn't find the tracking number. then he said he lost the number. then at least a week goes by and i can't get in touch with him. he says he ran off to vegas to get married and had to take car of some personal things. understandable. but how long does it take to box up 2 things and ship them? 10 minutes? 20 minutes? another week goes by and he says he lost my address. so i give it to him again. that was around dec 9-10th. i know it was because i was stressing about my finals. well, i'm home from college now and trying to get the swap done and i'm still without parts. he says he shipped it the day he asked for my address. it takes 5 days tops for me to get something from california. i order things from there all the time. this is the 10th day and the mail has already run for the day. btw he shipped it usps so there is no tracking number :bash: . i generally dont do things like this but customer service like this is unexcusable. and i know im not the only that has gotten service like this from him. sorry for the long post and sorry for doing this but i want my damn parts!!!!!

welcome to the club ! it took him over three months to do my harness and it still wasn't what I had ask for. I told him that I wanted to retain all the factory gauges.(THAT MEANS ALL) the temp wire was completely removed from the harness and the oil level sensor was removed as well.

oh ,I almost forgot ! there was a loose wire in the harness and melted almost half of it ! His reply "you must have nicked it while installing it , send it back and I will look to see if it was our fault ." and If I had sent it back I'm sure it would have been my fault . so I rewired it myself and now its purring like a kitten!

Im not out to hurt other peoples business, (just to inform people) but he needs to work hard on his customer relations. I understand that things happen but I ask for him to send me a factory harness back to me and I would send him his/mine back as soon as I recieved the factory harness. This way I could wire the truck myself. His reply "I don't have one to send you send me the burnt one back and I will fix it for you ".Sorry ,but I don't want a reworked burnt harness built by someone who tends to lose things and waits 3 months to ship something. I would be stuck with nothing.I now have to purchases a factory harness for $300(plus the $400 for his harness)and wire it myself over the winter.

p.s. I even mentioned in my book where I got the harnees for my conversion at ! so he can't say I'm out to hurt his business !

heres a pic of the burnt harness ! imagine if it had burnt the whole truck !

Brian
The delay on shipping is not my fault, you even replied that you understood the delay do to chismas traffic. I dont control the Pst Office mail flow. Prehas you may mention what a killer deal you got from me, regulator, hardware, VATS and shipping for your harness. REMEMBER. YOU CLAIM TO BE ON A BUDGET AND DIDNT HAVE THE MONEY, I TRIED TO SAVE YOU MANEY AND WAS TRYING TO HELPED YOU OUT BY PROVIDING THE PARTS YOU NEEDED TO STAR YOUR ROD, I USED THE CHEAPEST SHIPPING METHOD TO SAVE YOU MORE MONEY WHEN MY COUNTER OFFER WAS $120 + SHIPPING AND YOURS WAS... I AM A POOR COLLEGE STUDENT AND DONT HAVE THE MONEY (I FELT LIKE HELPING YOU AND PICKING UP THE SLACK BUT NOT TOO MUCH SLACK)
LET'S SEE
VATS $40
REGULATOR $110
HARDWARE $90
SHIPPING $18

GOOD LUCK WITH HIS BOOK

Quote:

---

LEts be fair
You accepted the offer for $120
shipping is $15 priority
total $135

regulator $110
Vats $ 30
Shipping $ 15
total $155

Tell me what you think
Is an even trade cool with you ?[/b]

---

this quote is being taken directly from a pm sent to me from you. nowhere did you mention any hardware being sent with it let alone $90 worth. and yes, i understand christmas mail. it cost me 12 bucks to ship you my harness. i know the box can't be any bigger than the one you're shipping my stuff in. i shipped it in a damn mayonaise box that was like 15x15x15. i'm going on what you've told me. christmas mail wouldn't have been an issue if you would have shipped it when you first told me you did.

btw did you check the shipping log to see when it was shipped??

THE RGULATOR DOES NOT WORK PROPERLY WITH OUT THE HARWARE SO I DECIDED TO DO YOU A FAVOR AND SEND THE FITTINGS AND GAUGE.

BTW LAST TIME BRYALN TALKED TO ME I WAS HOME SICK, NO I HAVE NOT CHECKED THE LOG. I AM STILL IN BED AT HOME.

$40 IS WHAT I SELL THE VATS FOR $30 WAS BRIANS PO MAN DISCOUNT
$110 FOR THE REG
$18 I PAID FOR SHIPPING I PICKED UP $3 SLACK
$90 FOR THE NECESARY HARDWARE AND GAUGE (Gauge needed to set fuel pressure)

$258 - $120 += redspeck_09 talking smack for the $138 I picked up.

Thank you Brian

well thank you for everything man. i appreciate you helping this poor little college student out. i'm sorry it was such a big deal. i didn't ask for your damn charity. i didn't ask for the hardware, and if i remember correctly, at one time i was going to throw in some money to buy it, but i told you no, and that all i needed was the regulator. talking smack? how am i talking smack? i'll i've stated is that you didn't ship the parts when YOU told me you were going to. then YOU LIED TO ME and told me that you lost the tracking number even though it was never shipped. that really pissed me off, but when i talked to you later you said you had another guy that does your shipping so i can understand how it can happen. i was cool with that. but over a month man? come on.

"THIS MAKES ME THINK THAT THE REST OF THE WORK ON YOUR S10 CONVERSION IS JUST AS HACKED." only as hacked as the wiring !

"Zo6s10 Guy Personally confirmed with me that the charging wire rubbed on the fuel rail. YOU DON'T HANG WIRE LOOM ON SHARP METAL EDGES. USE THE CORRECT HARWARE."

It was fastened with the factory plastis clips and I didnt comfirm a damn thing with you ! you assumed and tried to make me believe thats what happened.you see, theres the problem :make everyone believe your right and everyone else can't even install a wiring harness without cutting it all to hell ! was the one I sent you cut up ? NO ! have I ever had a problem with harnesses ? NO !

"It is eveident that you dont know how some of the late model gauge systems work. If you really know what you are doing you should know that the gauges work on 8192 baud and not individual senders"
hmmm..Thats why I thought I would let someone who knew do it . I guess Im just another dumbass customer whose not up to date with the 8192 baud. If I were do you think I would have wasted three months of my life and $40 in phone calls just to recieve a screwed up harness in return?

So why are you not working for any of those companies now? Let me guess ....you were always right about everything!and they were always wrong !

and exactly where are the so called "sharp "edges of a fuel rail anyway? in all of my coversions I have yet to see one?

"Honestly that is a MECHANICAL FAILURE The wire was not properly fastened to the loon clips. (don't seek a job working on Aircraft)"

Apparently you have worked on some aircraft . You know exactly what will burn one.


" GOOD LUCK WITH HIS BOOK "
Thanks. I'm sure it will sell better when I revise it and take your name out of it ! :thumb:

oh ... and remember folks....The cutomer is always right ( except when dealing with DYNATECH !)

Ill put in a good word (or two ) for you ! :thumb:


HAVE A NICE DAY !

but when i talked to you later you said you had another guy that does your shipping that was one of the lies he told me !

The other was thats "The harness is in the tachometer calibration department". :bs:

I think he would rather work on his own junk then worry about the people that pay for it .

ZO6s10 Boy personally called me and told me the wire shorted on the fuel rail, now he wont hold up to his phone call.
Why else would he not send the harness in for inspection????

PS Whre do you work genius???

because it would be a waste of time ! you know it and I know it ! you would find some lame reason for it not to be your fault and you would try and charge me for fixing it . I would then tell you to ship it back to me and it would arive in pieces if it arived at all. Thats why I wanted you to send me one first and then you could fix mine or salvage what you could. I waited 3 months for the harness the first time. I dont want it to set in the driveway for 6 more months.
I just replaced the burnt wires for now until I can rewire another factory one myself. I have done it in the past and this on is no diferent 02 S10/02 camaro. me and ALDATA will take care of it .

Quote:

---

Originally posted by Dynatech@Dec 21 2003, 12:03 AM
ZO6s10 Boy personally called me and told me the wire shorted on the fuel rail, now he wont hold up to his phone call.
Why else would he not send the harness in for inspection????

PS Whre do you work genius???

---

where did you learn to spell? :point:

:imwstupid: ive been there with brian through this whole thing, yet i dont recall him asking for any favors, just his product, which it seems like he's been told stories as far as they go. he shipped his stuff to you before the 10th....of November he's tired of waiting and the postal service stopping for the 8 days of Hanukuh, would have got it here faster if it was actually sent, so x-mas isnt even an issue yet.


:thumbdown: :thumbdown: :thumbdown: :thumbdown: http://www.stang.cc/tmcaalbums/Misc-...1071985057.jpg

:point: :thumb: :imwstupid:

i dont want to argue...i just want my parts. thats all i want for christmas, santa. actually i wanted them for thanksgiving. or before thanksgiving really.

Quote:

---

Originally posted by RedSpeck_09@Dec 21 2003, 12:55 AM
i dont want to argue...i just want my parts. thats all i want for christmas, santa. actually i wanted them for thanksgiving. or before thanksgiving really.

---

don't worry.... the easter bunny will bring them.

I bet its coming by covered wagon! :laugh:

Quote:

---

Originally posted by Sleeper@Dec 21 2003, 12:42 AM
:imwstupid: ive been there with brian through this whole thing, yet i dont recall him asking for any favors, just his product, which it seems like he's been told stories as far as they go. he shipped his stuff to you before the 10th....of November he's tired of waiting and the postal service stopping for the 8 days of Hanukuh, would have got it here faster if it was actually sent, so x-mas isnt even an issue yet.


:thumbdown: :thumbdown: :thumbdown: :thumbdown: http://www.stang.cc/tmcaalbums/Misc-...1071985057.jpg

---

Haked by ZO6S10 boy :point: :thumbdown:

[quote]Originally posted by Z06 S10@Dec 20 2003, 11:37 PM
[b] "THIS MAKES ME THINK THAT THE REST OF THE WORK ON YOUR S10 CONVERSION IS JUST AS HACKED." only as hacked as the wiring !

"Zo6s10 Guy Personally confirmed with me that the charging wire rubbed on the fuel rail. YOU DON'T HANG WIRE LOOM ON SHARP METAL EDGES. USE THE CORRECT HARWARE."

It was fastened with the factory plastis clips and I didnt comfirm a damn thing with you ! you assumed and tried to make me believe thats what happened.you see, theres the problem :make everyone believe your right and everyone else can't even install a wiring harness without cutting it all to hell ! was the one I sent you cut up ? NO ! have I ever had a problem with harnesses ? NO !

"It is eveident that you dont know how some of the late model gauge systems work. If you really know what you are doing you should know that the gauges work on 8192 baud and not individual senders"
hmmm..Thats why I thought I would let someone who knew do it . I guess Im just another dumbass customer whose not up to date with the 8192 baud. If I were do you think I would have wasted three months of my life and $40 in phone calls just to recieve a screwed up harness in return?

So why are you not working for any of those companies now? Let me guess ....you were always right about everything!and they were always wrong !

and exactly where are the so called "sharp "edges of a fuel rail anyway? in all of my coversions I have yet to see one?

"Honestly that is a MECHANICAL FAILURE The wire was not properly fastened to the loon clips. (don't seek a job working on Aircraft)"

Apparently you have worked on some aircraft . You know exactly what will burn one.


" GOOD LUCK WITH HIS BOOK "
Thanks. I'm sure it will sell better when I revise it and take your name out of it ! :thumb:

oh ... and remember folks....The cutomer is always right ( except when dealing with DYNATECH !)

Ill put in a good word (or two ) for you ! :thumb:


How about a pic of your fuel rail with a melted wire?
What is your lame excuse for this short on the Alternator wire. It just decided to rub on the fuel rail on its own? There is no ground near by that can carry the current needed to burn the red wire.
What is your theory ZO6 boy

Instead of talking bad about each other, why don't you all try to find a solution that can make all involved happy! Dynatech, I don't understand why you would put down other peoples projects by saying they were a hack! I'm sure as a business person you might want to rethink your statements. Of course we are all human and do make misakes, it is how we deal with them that makes the difference. :smile:

Quote:

---

Originally posted by GMCwantsLS1@Dec 21 2003, 07:54 AM
Instead of talking bad about each other, why don't you all try to find a solution that can make all involved happy! Dynatech, I don't understand why you would put down other peoples projects by saying they were a hack! I'm sure as a business person you might want to rethink your statements. Of course we are all human and do make misakes, it is how we deal with them that makes the difference. :smile:

---

WERD! :thumb:

I have to deal with some big dawgs in my industry from time to time and I have to be very careful with my verbage or I could get my company shut down. I don't give a rip who f'd up, all I see here is a businessman that needs to calm down and take a hit. The more you diss the customer man the less you will have. Not diss'n you, just stating some facts :shrug:

How about a pic of your fuel rail with a melted wire?
What is your lame excuse for this short on the Alternator wire. It just decided to rub on the fuel rail on its own? There is no ground near by that can carry the current needed to burn the red wire.
What is your theory ZO6 boy

exactly ! you wired the damn thing ,you tell me where the ground is ! And did it ever occur to you that maybe two other wires got hot and as they were melting they melted into the red wire ?

How old are you anyway ? and exactly what does you education consist of ?I am 32 years old with a B.S. in Mechanical Engineering from the University of Tennessee with a minor in business . So in your thinking you are insulting someone by calling them boy. I am ABOVE THAT.

YOU NEED TO TRY TO BE.

"Instead of talking bad about each other, why don't you all try to find a solution that can make all involved happy! Dynatech, I don't understand why you would put down other peoples projects by saying they were a hack! I'm sure as a business person you might want to rethink your statements. Of course we are all human and do make misakes, it is how we deal with them that makes the difference. " :smile:

I have no problem with the workmanship of the harness .Its the fact I know that things happen and that a bad product gets through sometimes to the customer but DYNATECH has never had a complaint about one of his harnesses burning? THIS IS THE FIRST ONE ! If it were my business, I would do whatever I could to make the customer happy even if it ment giving a refund and eating a burnt harness. But apparantly he is self centered and would rather have someone talk about how bad his busineess practices are rather then how great he takes great care of his customers.

Remember ! customer service is what keeps businesses going !

Quote:

---

Originally posted by GMCwantsLS1@Dec 21 2003, 07:54 AM
Instead of talking bad about each other, why don't you all try to find a solution that can make all involved happy! Dynatech, I don't understand why you would put down other peoples projects by saying they were a hack! I'm sure as a business person you might want to rethink your statements. Of course we are all human and do make misakes, it is how we deal with them that makes the difference. :smile:

---

i just want my parts. thats all i've ever wanted. thats the only thing that will make me happy.

i hate thieves.

i am praying that it comes today.

GUESS WHAT EVERYONE...USPS CAME TODAY!!!! YAY!!!! AND I'M PREAPROVED FOR A 0% MASTERCARD.















BUT THERE WAS NO PACKAGE. dynatech sent me a message though.

Quote:

---

Originally posted by Dynatech
Hey Bryan
Looks like USPS wont work for me next time, I will file a claim for the parts. I will clainm them as lost. For the mean while I will send you another VATS and Regulator to talahase.

---

i'm glad he's sending me my parts. but you know what, and i'm generally not one to say this or call someone out on it, but this is too much of a coincidence for me. i'm gonna have to throw up the :bs: flag on this one. i think the parts were never shipped. i have never in my life lost anything via the postal service. now i know its possible, and i know its happened to other people. but this time, and under these circumstances, with everything that has happened, i'm gonna have to throw up the flag. don't mean to put dynatech down but this is too much for me. now i have to wait ANOTHER 5 days to get my parts. yay. :tantrum:

insert Bullshit flag here --&#62; ____ <--

sounds like someone needed someone else to take the blame when the parts were really never sent. highway robbery. i hope this isnt how you treat all your customers.

who is the admin/owner of this site?

Allen (Farmtruc) is the admin/owner of this site.

thanks

I&#39;m gonna go ahead and lock this thread now that it seems to be somewhat resolved.

It&#39;ll work it&#39;s way down.

I feel everyone has a right to post their opinion or dealings with businesses and members keep in mind we all have bad experiences.

Everyone have a happy holiday and enjoy the time off. :wave:


thanks,

allen