results of after tuning the LQ9

well did about 2 WOT runs on motor then we did a nitrous run, then another motor run, then we finally did the last motor run, did about a 30punch then it shifting nice and good then when it was going about 75, the tranny went



BOOMMMMMM!!!!!!!!& #33;!!!!


we were about a mile away from nelson's shop we coasted all the way there... seems like to us and according to some tranny guys that either the outer or inner shaft broke....

well so there I am just thinking what the hell Im going to do.... this just sux!! I really didnt wanted to leave the truck their cause I would have to make another trip to pick it up....

so we called UHAUL and they did not let no one tow anything with their 1/2 ton trucks.... so I ended up renting a 14ft moving truck and a car trailer.....
so towed my truck back all the way to Houston, straight to the tranny shop here, I believe its still under warranty?, he is going to take a look at it in the morning, I really dont know what to do cause I really want the FLT but I just dont have enough funds to keep on modding the truck for now, I spend enough getting the LQ9, and the holidays are just around the corner and we will be going on vacation so Im out of luck.. and the wife sure aint happy about what just happened... so to say the least the truck might be just sitting at home until I can get a FLT and it wont be probably until January...

well I just had to share another tranny thread with ya'll...
by the way the ride in allen's avalanche was freaking awesome... I like how them turbo's sound!

that sucks, but i know how u feel! transmissions have to be the most unreliable things in vehicles! :sad:

FLT?:drool:

what all do you have in store for the LQ9?

That sux. Were there any pressure adjustments made to the tranny?

the LQ9 has all bolt-ons and a 226/226 112lsa, 3200 fuddle w/4.10's

Im going over to the tranny shop, and friend that was their at the tranny shop this a.m. just called me and told me that it was the tranny oil pump??

I'll get back with ya'll in a little bit...

just got back from the tranny shop, the tranny is SAVED!!!! the only thing that broke was the input drum (i think thats what it is called). its the cup looking thing were the inner shaft goes into.... his opinion was that this usually happens when you have alot of power and you dont have the right suspension, he says that the shaft will start vibrating a little until enough power makes it break... I dont know if this is true?? but he said his turbo'd 6.0 did the same, and after he did all his rear suspension, he has never had a problem with it??? he said the truck might be ready to pick up tomorrow morning, he told me to take it to the track tomorrow since he is also wondering what the truck will do... I might have to go for a couple of runs...

<div class='quotetop'>QUOTE(ap2002 &#064; Nov 2 2006, 03&#58;42 PM) [snapback]71978[/snapback]</div>

Quote:

---

just got back from the tranny shop, the tranny is SAVED&#33;&#33;&#33;&#33; the only thing that broke was the input drum (i think thats what it is called). its the cup looking thing were the inner shaft goes into.... his opinion was that this usually happens when you have alot of power and you dont have the right suspension, he says that the shaft will start vibrating a little until enough power makes it break... I dont know if this is true?? but he said his turbo&#39;d 6.0 did the same, and after he did all his rear suspension, he has never had a problem with it??? he said the truck might be ready to pick up tomorrow morning, he told me to take it to the track tomorrow since he is also wondering what the truck will do... I might have to go for a couple of runs...
[/b]

---

Great&#33; What all has he done to his rear suspension?

<div class='quotetop'>QUOTE(twobit &#064; Nov 2 2006, 03&#58;50 PM) [snapback]71979[/snapback]</div>

Quote:

---

Great&#33; What all has he done to his rear suspension?
[/b]

---

dont know whenever I go pick up the truck, Im going to check it out, if I remember right he said the guy that did it for him charged him about &#036;700 for it installed... and he said it is a world of a difference, no traction problems either, his best run is a 12.4 back in august, ECSB 6.0 w/turbo, and I might be wrong but he was on 22&#39;s...

<div class='quotetop'>QUOTE(ap2002 &#064; Nov 2 2006, 04&#58;20 PM) [snapback]71981[/snapback]</div>

Quote:

---

dont know whenever I go pick up the truck, Im going to check it out, if I remember right he said the guy that did it for him charged him about &#036;700 for it installed... and he said it is a world of a difference, no traction problems either, his best run is a 12.4 back in august, ECSB 6.0 w/turbo, and I might be wrong but he was on 22&#39;s...
[/b]

---

sucks man, maybe he has caltracs? uve got the lq9 now right? no more "fastest n/a ecsb 5.3" :nono:

<div class='quotetop'>QUOTE(Allstar55566 &#064; Nov 2 2006, 05&#58;43 PM) [snapback]71983[/snapback]</div>

Quote:

---

sucks man, maybe he has caltracs? uve got the lq9 now right? no more "fastest n/a ecsb 5.3" :nono:
[/b]

---

yup I have the LQ0 in it now,,

yeah I wish I could of run the 5.3 int this weather to see what it would really do...

thats why its the THE LEGEND..&#33;&#33; :rock:

Now get back to San Antonio Friday night and run that BEAST with Allen and a few others....... :burnout:

<div class='quotetop'>QUOTE(jethro_3 &#064; Nov 2 2006, 07&#58;15 PM) [snapback]71992[/snapback]</div>

Quote:

---

Now get back to San Antonio Friday night and run that BEAST with Allen and a few others....... :burnout:
[/b]

---

well the good thing was that we did finish the tuning, so I wont have to go back, I am looking forward to going to SAR this winter season to hang out with ya&#39;ll and make some runs out there...

man i wish i had either one of ur setups, damn think about all them ponies under a rcsb hood&#33; maybe my 6.0 will get to have as much fun as urs one day&#33; ......one day very far from now :cry: :thumb: