i was wondering about how much a mirror assembly would be. or if you can just get the glass part? not cracked too bad but kinda a pain in the ass the see a crack in the middle.
Printable View
i was wondering about how much a mirror assembly would be. or if you can just get the glass part? not cracked too bad but kinda a pain in the ass the see a crack in the middle.
with or without turn signal/heat?
heat ..no signal. its a 2001
<div class='quotetop'>QUOTE(TXcrew @ Oct 31 2006, 07:03 PM) [snapback]71789[/snapback]</div>sounds like daniels ss, barely noticeable, but frustrating knowing its there. u cant see his usually unless u try pretty hard, but again just frustrating. i think u can get the glass part somehow. :thumb:Quote:
not cracked too bad but kinda a pain in the ass the see a crack in the middle.
[/b]
cool..i hope so..
You can order the glass itself, heated, signal, or not. My no heat no signal cost $25 installed from a local auto glass shop. Just find one and they should be able to hook you up!
I know Napa can get you the glass. Heated, don't know.
I took out mine at about 70mph with a construction barrel. Housing was fine, but the glass vaporized. I jsut went to the dealer & got a new glass. It just push-locks in place.
<div class='quotetop'>QUOTE(SCIV @ Nov 1 2006, 08:26 AM) [snapback]71835[/snapback]</div>cool.. ill call them today. :thumb:Quote:
I took out mine at about 70mph with a construction barrel. Housing was fine, but the glass vaporized. I jsut went to the dealer & got a new glass. It just push-locks in place.
[/b]
You got the plate behidn the actual glass piece didnt you? How much did that run? I just got the glass and they had to glue it to the thing that locks in the mirror.
Chris
Do a search on the web for a Muth Mirror. They make a replacement for GM and you can wire in your own signal. I had heated with driver dim in my '01 and wired in the signals to the dim on the center mirror and it was worth every penny. You can get them off the web or off eBay. :twocents: