any body familiar with it? i want to make sure that i can use the stock torque converter.... do i have to replace anything else on the valvetrain such as lifters, roller, rockers etc....
Printable View
any body familiar with it? i want to make sure that i can use the stock torque converter.... do i have to replace anything else on the valvetrain such as lifters, roller, rockers etc....
<div class='quotetop'>QUOTE(Blacked out 98' @ Oct 10 2006, 06:55 PM) [snapback]68727[/snapback]</div>You can use it with your stock tc, but you're going to want a higher stall in there pretty soon to get the most benefit from the cam. You'll need to pick up some Comp 918 springs to accomodate the higher lift and some hardened rods.Quote:
any body familiar with it? i want to make sure that i can use the stock torque converter.... do i have to replace anything else on the valvetrain such as lifters, roller, rockers etc....
[/b]
All based on my limited knowledge...
you will need a 2600 stall and push rods,springs 26918 to get the most out of the cam, if you use the stock converter then it will feel real sluggish off the line.
<div class='quotetop'>QUOTE(vv8 @ Oct 10 2006, 07:13 PM) [snapback]68731[/snapback]</div>Yeah what vv8 said. I was thinking about getting that cam, but was told i needed a stall because it was going to be a real dog down low without a stall.Quote:
you will need a 2600 stall and push rods,springs 26918 to get the most out of the cam, if you use the stock converter then it will feel real sluggish off the line.
[/b]
vv8 i dont know if you remember me from HRP about 2 weeks ago on a friday night i was with a buddy in an orange 55 chevy and we all talked for a while at the staging lanes and you showed us your truck?....well thats sort of a bummer about the cam, if i dont replace the springs and push rods could it be catostrophic or will it hold for a while?....any other cam suggestions im looking for something that sounds pretty good loap wise with a set of headers but i dont really have a lot of extra cash laying aound for the springs and other stuff
I'm running that same cam on a 115 LSA instead of 112 with a 3200 stall, Manley springs and titanium retainers with MTI hardened pushrods. I'd like to go more duration with a 600 + lift when do my next swap.
What if he swaps out the rear gears to a higher numerical number - say like 3.90 or 4.10s?
<div class='quotetop'>QUOTE(Blacked out 98' @ Oct 10 2006, 07:32 PM) [snapback]68738[/snapback]</div>Yes sir I do remember talking to you, just can't put a face to it lol, sorry had alot on my mind that night, well you can run the stock springs as long as you don't go over 5k on the revs and rods would be ok as well, but if you go to www.ls1tech.com look in the parts for sale section there are plenty of good deals on springs and rods, alot cheaper. thats how I have all my toys, garage shopper.Quote:
vv8 i dont know if you remember me from HRP about 2 weeks ago on a friday night i was with a buddy in an orange 55 chevy and we all talked for a while at the staging lanes and you showed us your truck?....well thats sort of a bummer about the cam, if i dont replace the springs and push rods could it be catostrophic or will it hold for a while?....any other cam suggestions im looking for something that sounds pretty good loap wise with a set of headers but i dont really have a lot of extra cash laying aound for the springs and other stuff
[/b]
<div class='quotetop'>QUOTE(93Ext5.7ltr @ Oct 10 2006, 08:36 PM) [snapback]68744[/snapback]</div>it would help, but still be a dog untill 2400-2600 maybe as high as 3000.Quote:
What if he swaps out the rear gears to a higher numerical number - say like 3.90 or 4.10s?
[/b]
thats the same exact cam i have and danny and i did it in his dad's shop in under 6 hours..... your gonna need new pushrods, springs and retainers..... and you can get new lifters if you want but i used stock on mine...... but im still running the stock converter and open longtube headers.... i did lose some low end with the open LT's ..... but i LOVE the cam especially after i got teh tune from Allen... thing runs like a scalded ape
<div class='quotetop'>QUOTE(vv8 @ Oct 10 2006, 08:44 PM) [snapback]68747[/snapback]</div>Quote:
Yes sir I do remember talking to you, just can't put a face to it lol, sorry had alot on my mind that night, well you can run the stock springs as long as you don't go over 5k on the revs and rods would be ok as well, but if you go to www.ls1tech.com look in the parts for sale section there are plenty of good deals on springs and rods, alot cheaper. thats how I have all my toys, garage shopper.
it would help, but still be a dog untill 2400-2600 maybe as high as 3000.
[/b]
Hey VV8, how did your truck like the new cam 226/226 .588/.588 112LSA? I was thinking about going with something similar.
Later Man
thanks for all the great info guys
txstvanwilder............i saw your video that with the cam, after you got the tune did it make a big diference in power, and does the truck lope a little less or is it still the same as in the video?
<div class='quotetop'>QUOTE(Blacked out 98' @ Oct 12 2006, 07:32 PM) [snapback]69129[/snapback]</div>Quote:
thanks for all the great info guys
txstvanwilder............i saw your video that with the cam, after you got the tune did it make a big diference in power, and does the truck lope a little less or is it still the same as in the video?
[/b]
after the tune Allen placed the idle a lil bit higher so it doesnt lope AS much but still has a great sound.... especially on these cold mornings...... as for the power difference.... DAYUM is all i can say i love it
i havent had experience with other cams in my truck to compare to, but as from stock it picks up HARD bout 1700 or so all teh way through the power band
Byran you dont need all that stuff you'll never gonna beat old orange
<div class='quotetop'>QUOTE(bulldog5.3 @ Oct 11 2006, 08:47 AM) [snapback]68812[/snapback]</div>Quote:
Hey VV8, how did your truck like the new cam 226/226 .588/.588 112LSA? I was thinking about going with something similar.
Later Man
[/b]
its about the same as the old cam, the old cam pulled better up top 114 to this new 112.