Just see which intakes everyone uses? Also I will be mounting a dry shot nozzle in the end of it, do any of you have and pics of this ? I have it mounted in the factory air box now
Printable View
Just see which intakes everyone uses? Also I will be mounting a dry shot nozzle in the end of it, do any of you have and pics of this ? I have it mounted in the factory air box now
<div class='quotetop'>QUOTE(acman410 @ Sep 24 2006, 07:28 PM) [snapback]66362[/snapback]</div>Quote:
Just see which intakes everyone uses? Also I will be mounting a dry shot nozzle in the end of it, do any of you have and pics of this ? I have it mounted in the factory air box now
[/b]
I run the True Flow. Haven't tried anything else, but like it just fine. Uses the stock airbox and sells at a good price. www.trueflow.com
Something made of plastic to beat the heat and of course it has to have a NOS nozzle installed in it. :thumb:
I am using the K & N ColdAir. It works great in my opinion. If your going to run a dry shot you can get something like this CONE FILTER RING That will spread it out evenly before it goes in you MAF. Just a thought. this will work great in any cone filter.
i recommend the K&N FIPK. MAKE SURE IT'S COMPOSITE AND NOT METAL.
im going for the AEM. but i hear they all do as good as each other.
<div class='quotetop'>QUOTE(rumblebox @ Sep 27 2006, 06:50 PM) [snapback]66872[/snapback]</div>why composite than metal. i need to know so i dont screw it up cause i want to run n2oQuote:
i recommend the K&N FIPK. MAKE SURE IT'S COMPOSITE AND NOT METAL.
[/b]
metal holds heat more than plastic
<div class='quotetop'>QUOTE(rumblebox @ Oct 1 2006, 07:32 PM) [snapback]67472[/snapback]</div>You have me canfused also, Nitrous comes out at a very low tempurature. So heat build up shouldnt be an issue, it actually cools the intake. correct?Quote:
metal holds heat more than plastic
[/b]
<div class='quotetop'>QUOTE(98vortecbw @ Oct 1 2006, 10:17 PM) [snapback]67519[/snapback]</div>not when your running N/A. your bottle wont always be full...i like volant and UPD. i have UPD with Volant Ram air. i like the 2 because its not an open element filter that sucks up hot engine air...."heat shields" are useless IMO. dont use volant if you plan on spraying though. they get pretty brittle with extreem cold.Quote:
You have me canfused also, Nitrous comes out at a very low tempurature. So heat build up shouldnt be an issue, it actually cools the intake. correct?
[/b]
<div class='quotetop'>QUOTE(98vortecbw @ Oct 1 2006, 09:17 PM) [snapback]67519[/snapback]</div>yes, but you can't constantly spray.Quote:
You have me canfused also, Nitrous comes out at a very low tempurature. So heat build up shouldnt be an issue, it actually cools the intake. correct?
[/b]
<div class='quotetop'>QUOTE(rumblebox @ Oct 1 2006, 10:40 PM) [snapback]67526[/snapback]</div>true :hshake:Quote:
yes, but you can't constantly spray.
[/b]