Printable View
I will be switching from my tiny stock '99 injectors to some '03 6.0 injectors on Saturday. My questinon is, how hard are these puppies to install? i have played around a little and figured out the clips are a pain in the ass to get off, but do the injectors come right out with the fuel rail when you pull it up, or do you have to do some prying to get them up. I read that you have to pry them out of the fuel rail, but that shouldnt be a problem. Any other tips for installing them?
Chris
Treat them like the bitches they are, slap some vaseline on the oring and shove them in.
Werd, what Red said...
its real easy bro, just unbolt your fuel rails and pull them out. then make sure you lube the o-rings on the new inj and pop them back in the bungs on the manifold. get them all lined up and give each of them a good shove so you can feel them "pop" into the manifold, very easy, kinda like using toys on the old lady :devil: lots of lube and shoving and poping!
what size are the ones your putting in, I also want to take my #16"s out
Thanks guys, I'll give em hell this weekend!
Chris
<div class='quotetop'>QUOTE(adrenalinep @ Jun 28 2006, 08:58 PM) [snapback]56601[/snapback]</div>i think i have another set left, 03 hummer lq4 6.0l...Quote:
what size are the ones your putting in, I also want to take my #16"s out
[/b]
No worries, Should only take you about 30-45 mins to install them. Like stated above harder to install them that to take them out. Treat them like a $2 hooker, Spit on it and slam it in there.. lol, FYI on the tune, just use the stock setting from the truck they came out of. no need to scale them you have a totaly differnt fuel system. Should be a solid number.
And I thought bi!@^es and wh@7es got "No Vasaline and No Kiss...."
I am so glad I read this forum! :doh: :lol:
Mine gets a kiss and the lube when needed. I miss the days when you could slap them around but I sleep better at night without it.
I still have assembly lube left from my cam install, will that work?
Chris
Chris that sounds sick.... just sick! :puke:
What....had to lube the magic stick, i didnt wanna mess anything up!
<div class='quotetop'>QUOTE(chrisj6 @ Jun 29 2006, 10:30 AM) [snapback]56651[/snapback]</div>never stick it in dry...Quote:
I still have assembly lube left from my cam install, will that work?
Chris
[/b]
(stop think bad thoughts...were working on cars not chicks)
alright guys, its time to get started. I should be back in an hour! lol If I'm not, call the president.
Chris
Kind of stupid quesitons, dont know anything abiyt injectors. What exectly do they help?? And are they worth it on a bisically stock motor? What size would I need?
No need to go to a bigger injector on a stock engine.
4 of the bitches are in, #8 took a little bit of shovin, but it fit! lol Lunch break, bbl!
Chris
I heard that if you have too many bottles of liquid courage it gets harder to get it/them in...... :point:
haha...i stayed sober during this install. With this being the first time I installed a set of injectors I wanted to be sober. haha They are in though and running good. I just copied all the injector stuff over from an 03 file and it worked like a charm. It got rid of the dipping when coming down to idle also!
Chris