I'm enjoying the holiday by staying home!
Printable View
I'm enjoying the holiday by staying home!
We're killing brain cells watching Southpark! :laugh:
yep, boring night here watching the 'shield' reruns, btw i dont think dick clark is going to host next new years if ya know what i mean. :yawn:
we had a blast out at the ranch...but im home already :smile: way too many hiway patrol out for me right now...
How about this one: I have to get up in 4 hours to drive in a hour to work and I've been drinking since I left work Hahaha...LOL Man I seem to even be typing OK so surely I can drive, RIGHT !!! I got a 20 pack that I just brouht home that I bought too and gonna work some more on that as soon as I get my ass off the 'puter. Hrmmm...that don't look right "brouht" should be "brought" I hope...oh well the fogs rolling in again so I'll see you gents and ladies later...Zed :whack: :doh: :hshake: :rofl: :wave: :devil: :laugh: :help: :thumb: :taunt:
Couldn't find a designated driver so we sat at the house and got blitzed on some cheep wine. Guess it is better than sitting in detox or in the morgue.
Stayed at home with my family and watched TV. :thumb:
Stayed at home and ground down the counterwieghts on my crank to clear the piston skirts sound like fun?
You what?!?!?! You ground on the crank? I guess you're sending it back out for balancing?
Just ground about 20 thousandths off of em. Not much at all. Itll be fine rougly the same amount was ground off each onea dn it was already balanced perfect before so it is probably about as balanced as it was when it came from eagle now. I dont have time to do it the right way and send it back to the speed shop and get them to put it on a lathe then balance it. I gotta be back in texas by thursday for work come hell of high water if I gotta tear it back down when I get down there so be it but Im in a major time crunch now.Quote:
Originally posted by RedHeartbeat@Jan 1 2006, 11:09 PM
You what?!?!?! You ground on the crank? I guess you're sending it back out for balancing?
Why didn't you just cut the pistons in the area in question? I'd sure be complaining to someone about having to cut/grind on either one for what one of those kits cost. I understand if you had to cut on the engine block for a little clearance for the 4" stroke but the piston/crank clearance should have been correct as purchased since they were designed to work with each other. You are using their rods, too, correct? That stuff is supposed to be a matched setup that just drops in is what I have read.
There is nothing on the shelf for the combo I have. The only thing of the shelf for my rotating assembly is the rods. The crank was clearanced for the pistons but they cut it with a smaller radius bit than the crank counterweight so it had two humps then went deeper in the middle. Yes I am not too happy with JE and EAGLE both of their products have been screwed up. I didnt have a choice in what to do. When grinding is necessary on a rotating assembly you need to grind on the heaviest thing tout the cause less of an unbalanced effect. Grinding on a 300 and something gram piston compared to a 60 pound crank is a big diff not to mention it is supported by the mains so its not as critical. In a perfect world if I had an extra 3-4 days it would be dropped off at the speed shop and get them to turn it and rebalance it but I dont have time for it and like I said I only ground about .02 off 4 counterwieghts 2 counterwieghts got .05 which is pushing needing to be balanced again but they are at the ends of the crank so it isnt so bad. This is by no means a recommended way to do this but Im planning on pulling the motor this summer anyway an punching it out to a 438 with a Lunati crank and wiseco pistons and hell fire rings then strap the new Whipple on there or a pt88 turbo in an sts kit so it will be fine for the time being and this truck is no longer my DD so its not so critical if the SOB falls apart after I get to TX oh well.
i watched LAW and ORDER ...aaaalllllllllll day. I do mean all day. We left at 8:00 to wifeys friends house till 11:00. It was okay i guess. I left my brain cell killer at home.. :cry: But i have alot left so its okay.. :taunt:
didnt do a thing, btw thanks allen the truck is running much better than befores...no more ping a ling