Printable View
Im currently running an 18" magnaflow with longtubes and ORY with a e-cutout right before the magnaflow. Im fixing to add a dynomax bullet to cut down on the rasp I have around 3000-3600rpm and im debating whether to put it before or after the cutout. Im thinking in front of the cutout just give it a deeper tone when its open. Anyone done this?
What else is done? I would still have the cutout before the bullet and muffler, nothing better than straight cam sound!Quote:
Originally Posted by Robt34
Its a 5.3 and im running the 212/218 cam, but I figured with the bullet in front of the cutout it wouldnt restrict the open cutout sound much at all. Just maybe make it sound a little deeper, I just really want to get rid of the rasp.
Does the rasp only occur with the cut out open or is all the time? If its all the time, you can put resonators where your cats were and it should cut it down.
Occurs between 3k-3600 rpm but its only really noticeable thru the magnaflow. I thought about resonators but everything i have read says the bullet should do the trick. Im getting it thrown on this weekend so we will see.
I still say cutout before. The cutout is controllable, and throuwing anything in front kinda defeats the purpose.
That's just how magnaflows sound. I had two magnaflows 22" and 14" online and still raspy.
if you like the loudness of the cutout, keep it after. you'd be surprised how much noise a bullet can cut out.
Welp, the deed is done. I went ahead and added the bullet right before both the cutout and magnaflow. Tone out of both got deeper, and best of all the rasp is all gone throughout all rpm range.
You're exactly right, the cutout did quite down a bit but really only at idle. Anything more and its still loud with a deeper tone to it.Quote:
Originally Posted by TXsilverado
Overall I'm very happy with the turnout. Hope this helps anyone in my same situation.
Post up some pics, man. Or a before and after vid. You can't just leave us hanging.
Yea I'll get on that, its pouring outside right now, I'll make a vid soon.