-
Seats? What ya running?
Anyone here done seat swaps or recovers or anything like that?
I'm looking at either recovering the seats with www.leatherinteriors.com or swapping the seats out completely. Just cant make up my damn mind. I keep seeing all these Tokyo drift looking seats on Ebay and they are god awful looking. Every other option seems to be an equally used set of stockers, or an 07-13 set of leather from like a Tahoe. But I cant seem to get a straight answer about the tracks fitting properly.
Also, going to power from a manual seat... Anyone know if the factory plug is hanging out in the harness somewhere? Or are we looking at having to do some creative wiring?
Feel free to discuss. lol
-
So..... nobody has changed seats or done anything other than the old worn out stockers?
Bueller?
-
I have Kirkey Pro Streets.
-
-
-
I had heated leather seats in my 01 ECSB, I swapped them for 06 Tahoe heated leather seats, much better condition, anyways the seat plugs and seat belt sensor wires and connectors are different, the heated seat module is also different. If you want factory heated leather your need ALL the parts from the donor vehicle, IE door panel controls, buttons wire harness and connectors to simplify the swap, the floor holes and brackets are the same from all the years, I you want just plain powered leather seat the seat only needs a power and a ground for full operation. Btw make sure that the seats module board works in the donor before you swap it into yours or you will
Be playing a guessing game trying to figure out why your seat doesn't work. If you want aftermarket seats, recycle your old seat brackets or buy a wrecked set of truck seat brackets and make them work
-
Stock with head rests removed. 2 lbs each lol
-
I wish I could run some kirkey seats. I think the wife would frown, and i'm not even close to fast enough for those yet haha.
Probably gonna just steam clean the hell out of the stockers for now and try to find some later model replacements.
-
Im running 2002 olds intrigue full power buckets in my 90. Welded up some Frankenstein seat brackets for them to drop in.
http://i19.photobucket.com/albums/b1...e/IMAG1878.jpg
http://i19.photobucket.com/albums/b1...e/IMAG1558.jpg
-
What did you do about seat belts?
-
The stockers snap right into the new seats' built in buckles.
They can just bolt right back on and work fine but ill probably figure out something a little more custom.
-
http://i1242.photobucket.com/albums/...psfcbb8717.jpg pics a little dark it's at night black leather with red stitching
-
i picked up a set of Acura RSX seats and plan to reupholster them in red leather when i do my interior. I'm planning to mount 5 point harnesses with them also.
-
Mmmm, spray paint interior. must smell nice on hot summer days :)
-
U must be referring to the consol in the pic above.
-
-
its been painted for about a year befor was in stalled so not bad
-
I will second the bonneville seats they fit nice and are very comfortable I will get a pic of a 91 with charcoal leather ones.
