Printable View
http://i61.photobucket.com/albums/h4...ps2d158f59.jpg
As you can see my fuel cross over line is sticking out to far and the alternator is hitting it. Am I just missing something or do I gotta get a damn relocation kit. And is there any thst aren't stupidly priced.
I might have a solution.
http://www.ls1truck.com/newstorage/p...1%20(Copy).jpg
Im guessing you're being a smart ass lol
Chk out the pic. Alternator is moved over
Yea I seen that, do you know what was used.
What about using a 90 degree fitting on the end of the rails and straight fittings on the end of your cross over hose?
ive seen some use a 180* fitting and have the fuel crossover tucked under the intake or never worry about ugly again and pick up car accesories
Sleepers intake setup is the same and we used one of those expensive tight radius 180deg fittings on it lol
I fixed it put the cross over on the back ran the fuel to the front, thanks for tge tips guys
Same intake I ran last year. Just use a 90* that threads straight into rail. Makes plenty of room
Thats what I had I guess the -8 was just a little ti bigQuote:
Originally Posted by ecld_07