6.0 LS into a 90 Chevy Silverado rcsb

Hey everyone! I'm gearing towards an Ls swap into my 90 Chevy pickup. It's currently equipped with the (slow as a dog) 350 tbi / 700r4 auto setup. I'm looking to drop a 6.0 LS motor in it, but I have a bunch of questions about the swap. Now, I have been looking on eBay and found motors with the tranny, wiring,eco,tthrottle by wire pedal, and so on. But what I want to know, is have any of you done this swap before? What problems should I expect to encounter? And is there any specific wiring harness or adapters to make all of the factory gauges and stuff compatible with the newer gen motor. Any help or advice is a step closer than I've been able to get on my own, and hugely appreciated. Thanks in advance everyone!

Shaun

Oh, and tranny tailshaft length, and spline count/compatibility with the driveshaft. Thanks again!

Please read the swap stickies.

Could you post a link to one on a reply? The only sticky I'm able to find in the "v8 conversions" forum is the 4.3 to 5.3 sticky. I'm also on my phone, so I may have to check from an actual computer. Thanks!

Your best bet to do dbc not dbw...you stock pedal will work and use an 99-02 cable! If you going 6.0 don't use the 700. 60e or 80e. 80e is best. If get the psi harness pretty easy to to hook up plug and play really.

thanks bud! i checked out their site. seems like they have mostly all i need. I emailed Jon at psi with a little more in depth questions. thanks again!!

I'm gathering parts for a 6.0 in a 1990 GMC rcsb too! Looking forward to your following your install!

Quote:

---

Originally Posted by Shaun

Could you post a link to one on a reply? The only sticky I'm able to find in the "v8 conversions" forum is the 4.3 to 5.3 sticky. I'm also on my phone, so I may have to check from an actual computer. Thanks!

---

Hard to find, I know. This was literally the first sticky in the LSX Conversion forum. Obviously the not the first place you'd look for an LSX conversion.

http://www.ls1truck.com/forums/lsx-t...onversion.html

Just plain crazy...lol

Well, I see you live up to your user title. Thanks regardless

Jon at psi help me out with a few questions I had...cool fella! And your welcome if you any other question just ask

Quote:

---

Originally Posted by pl4yboy

Hard to find, I know. This was literally the first sticky in the LSX Conversion forum. Obviously the not the first place you'd look for an LSX conversion.

http://www.ls1truck.com/forums/lsx-t...onversion.html

---

when someone can't read, who do you blame? parents, teacher, or...

Wondering how your conversion is going. I did something similar. If you need any help, just ask.

Thanks Mickey. I haven't started yet. I just finished paint and body, and I'm finishing up the rest of the interior. Hopefully within the next couple of months...