Hey guys I want to spry a 125 shot wet on my 4.8. I want to put some tr6 plugs in so what's the part number n what should I gap them at and souls I be ok with my base tune?
Printable View
Hey guys I want to spry a 125 shot wet on my 4.8. I want to put some tr6 plugs in so what's the part number n what should I gap them at and souls I be ok with my base tune?
ngk tr6, part number is 4417 or 4471 I don't remember, you'd prolly be OK, but I'd stick with a 100 shot on a base tune. I never messed with gapping I just opened em and put em in, but if you must 25 or30. Other good nitrous plugs are the ngk br6ef I think the part is 3177 don't let the idiot at the part store give you ngk br6eS its a 4wheeler plug.
Ok thanks
4177 is tr6 I believe
i run BR7EF,but yes tr6 be ok for u
Hey do y'all know what color wire controls the throttle body position on my 07 4.8.
Like stated in your other thread...doesnt work that way. Give Nitrous Express a call and they can answer every question you have, and even get you the right parts to go fast.
DO NOT GO WITH THE TR6 plugs. I know a lot of guy are using them for nitrous but it is a horrible plug to use because it puts to much heat in the cylinder. Use the NGK BR7EF pugs gap them to .35 and you will be plenty safe. As far as a TPS wire i believe it is a Purple or a Dk green at the throttle body.
Trey