my guage cluster is sh** the bed and im gonna get a new one. i was wondering since i did a 4l80e swap in my 99 sierra nbs, if i could get the guage cluster with the tranny temp guage. and what do i have to do to make it work.... thanks
Printable View
my guage cluster is sh** the bed and im gonna get a new one. i was wondering since i did a 4l80e swap in my 99 sierra nbs, if i could get the guage cluster with the tranny temp guage. and what do i have to do to make it work.... thanks
Should be just plug and play
make sure and get what that starts really low. My tranny temp won't even register anything unless I am at the track, never have seen anything on the street. My gauge starts at 140 deg i think, but this may be due to my 2 - 30K super coolers...
I just recently went with the escalade cluster in my 2000. I like the look and the fact that it has trans temp and goes to 120mph. Found mine for $150 at a local junkyard. Plug and play. You can use one from a 99-02.Quote:
Originally Posted by kbomhower
so the temp sensor is alreasy in my truck i just dont have the guage in my cluster now?? so swaping to the guage cluster with one in it should work without running anything to the transmission itself??
They are already wired for the temp gauge. Do you have the steering wheel controls?
nope i got a 99 the first year of the nbs. thats why i was curious if i had the wiring already there just no guage. id like to get some esco guages or anything thats got the trans temp and goes to 120mph.
I've got a 99 and put a denali cluster in. It works fine, so you're good. Got mine off of ebay for $80 shipped.
Will this work on a 2003?
Yeah. Just get an 03 and up cluster.
Good deal thanks
whats the difference between years?? and also what about adding a autometer trans temp?? i have a singe guage piece for the steering collum. didnt know its thats worth it or not tho.
The connector/plug is different on the 99-02 vs 03-07. I saw a thread, on pt.net I think, where someone put an aftermarket guage where the factory trans temp goes. That's one option since you already have the guage. I've got my old cluster if you're interested in using the Autometer guage.
Will this help you out.
http://www.ls1truck.com/forums/my-ga...-garage-3.html