Vinci trucker cam kit

I guess I'll go ahead and put this up so if it sells it will motivate me to go ahead and yank it from my LS1. Cam is 216/224 .551/.551 115LSA and will come with the comp 918 springs, retainers and pushrods. I'm going to swap to a bigger cam with duals so this has got to go. Would make a killer boost cam or be excellent in a 4.8 or 5.3 NA setup too. It has 12k miles on it in an LS1 and was nasty in the midrange. It would rip 2 lengths on my cousins patriot head 6.0 MS3 6speed setup from a 50 roll before he could reel me in and I had an A4! The pushrods might not work since my motor has LS7 lifters in it but I won't need them.

$325 shipped...

Also this is in a motor that isn't being used right now so mileage won't change.

Quote:

---

Originally Posted by ss454327

I guess I'll go ahead and put this up so if it sells it will motivate me to go ahead and yank it from my LS1. Cam is 216/224 .551/.551 115LSA and will come with the comp 918 springs, retainers and pushrods. I'm going to swap to a bigger cam with duals so this has got to go. Would make a killer boost cam or be excellent in a 4.8 or 5.3 NA setup too. It has 12k miles on it in an LS1 and was nasty in the midrange. It would rip 2 lengths on my cousins patriot head 6.0 MS3 6speed setup from a 50 roll before he could reel me in and I had an A4! The pushrods might not work since my motor has LS7 lifters in it but I won't need them.

$325 shipped...

Also this is in a motor that isn't being used right now so mileage won't change.

---

Soneone should give me input on how this cam would work on my truck... I like the idea of stockish idle fo sho!

I don't know if it would have stockish idle even in your LS2 but it would crush til 6k in that motor. They put down equal peak but better under the curve than the TR224 cams. I think youtube has some clips of this cam...it loped harder than my cousins 228R on a 114 in my LS1.

This cam is awesome. Had it my old white truck. 5.3 with longtubes and dual exhaust. Sounded badass. I have a clip on my youtube

Cool ill check it... Pat g spec.d me a cam 227/230 614/609 114+2 I may stick to that unless someone tells me id be happy with this... Not looking to go all out cause ita a dd that I take my kid with me in 99% of the time...

Whats ur channel phantom?

I may have to snag this. Did you ever tow with this cam in the truck?

Quote:

---

Originally Posted by Ls2Aero

Cool ill check it... Pat g spec.d me a cam 227/230 614/609 114+2 I may stick to that unless someone tells me id be happy with this... Not looking to go all out cause ita a dd that I take my kid with me in 99% of the time...

Whats ur channel phantom?

---

bah...once again Pat G fails to impress me with his cam specs. That Saab is no light weight and for a daily I'd go with the EPS 222/226 on a 114

also to the other guy this wasn't in a truck...1999 B4C camaro. Should tow like a beast in a 5.3.

That 222/226 is similar to the "rob" cam the tbss guys run and its a pig imo cause I beat a tbss with that cam... But I have bigger stall and he was rwd... Longtubes are coming first... Then cam I wanna be as sleeperish as I can without hurting the launches cause thats where I shine so far...

Those EPS lobes are very aggressive I bet it would walk all over most other cams in that size. It's what I am planning on running in my SSS...

Quote:

---

Originally Posted by ss454327

Those EPS lobes are very aggressive I bet it would walk all over most other cams in that size. It's what I am planning on running in my SSS...

---

I agree my buddy made tons of power in.his 5.3 with a 226/230ish by them...

cam kit is sold...I've got plenty of buyers lined up if the first guy backs out. Gonna pull it out this week.

Aero, found it
http://www.youtube.com/watch?v=8SImu9wcRUc

Ok so the original buyer of this cam decided not to buy it WAY back and I decided to just keep it at the time. It's now out of the engine and boxed up. I replaced it with an MS3 and dual PRC springs. Cam looks great and the pushrods are Comp 7.40 .080 with Comp 918 springs. All parts look really clean. Looking to get the same $325 for the whole kit. Postal money order only...

I wonder if I can weasel $325 out of the account from my wife ... er ... not happening! GLWS! Wish it were coming to me :)

PM me a price for the cam and pushrods.

I'd prefer to sell it all together honestly.

Say this cam will work well with turbo and a 5.3 3200 stall

Go 300 shipped and I will take it

This is more of a procharger cam honestly. How about $350 shipped?

Your original post says 325 shipped

325 shipped like it says i the post and I will take it send me a pm of your address for the money order

Are you there I will take it let me know where to send the money

Sorry man I've been sick as a dog...just now saw your post.

No prob being sick sucks