Opinion on springs?

Need some input on springs. Cam will have .620 lift. I've looked at PAC 1518s (which supposedly you can use stock retainers with) and a few others. Any input here? The springs are rated to .650, but I'm not sure I trust a beehive even at .620. A dual spring would probably be the way to go, but if you guys have had success, I'll go with the PAC. Patriots are on backorder from what I hear....

PAC 1521! Don't go cheap.... Get the good retainers and everything too

Quote:

---

Originally Posted by sprayedenali

PAC 1521! Don't go cheap.... Get the good retainers and everything too

---

I don't have Mitch Cobb money or a .700 lift cam. lol

im running the patriot dual golds....suck there out on order

Mitch Cobb money and Mitch Cobb money smarts stereo different things! :)

Might end up with some PRCs. I know a guy who gets stuff at cost from a company.

just got pat g to custom spec a cam for a motor im building... .609 lift and he reccomended the PAC 1518 springs

Quote:

---

Originally Posted by chvy=power

just got pat g to custom spec a cam for a motor im building... .609 lift and he reccomended the PAC 1518 springs

---

Just iffy on a beehive with that much lift. Doubles are 10$ more.

lift wouldnt be as big of a factor as the type of lobes that are on the cam. the pac 1518's are rated to a .650 lift but if you have a cam with aggressive lobe like the xr or xer lobes you would prob want the doubles...a less aggressive lobe you would most likely be safe with the behives

Quote:

---

Originally Posted by chvy=power

lift wouldnt be as big of a factor as the type of lobes that are on the cam. the pac 1518's are rated to a .650 lift but if you have a cam with aggressive lobe like the xr or xer lobes you would prob want the doubles...a less aggressive lobe you would most likely be safe with the behives

---

I feel like 10$ is just safe insurance.

Quote:

---

Originally Posted by pl4yboy

I feel like 10$ is just safe insurance.

---

i feels ya