Printable View
Hey guy's I'm new but been browsing for a while I'm currently deployed and trying to make sure that while I'm on leave I can have all the stuff I need for my swap let me know If you can think of anything I'm missing! I have a 1978 chevy k10 scsb 44 I am doing a ls1 swap!
5.3 complete engine intake to oil pan DBW
4l80e complete
engine mount's
inline fuel pump
wiring harness
ecm
brake pedal
I believe I have it all am I missing anything?
Thank's for the help guy's:)
A/C?
Undecided don't really need it but if it's not a big hassle then I would what's your take on it?
You said brake pedal, but I hope you meant accelerator pedal.
Do you have the TAC module?
You are gonna need the harness modded for the 4L80e and the PCM tuned for it and to eliminate VATS.
Awesome yes I am srry I meant the accelorator pedal I was lookin at this kit tell me what you think!
http://cgi.ebay.com/ebaymotors/ws/eB...TQ:MOTORS:1123
What year is your engine?
It's an 01 tahoe 5.3 l with a 4l60E drive by cable
Yeah, you don't need the one in the link you put up. That is for the newer GENIV engines.
You need one for a 0411 PCM.
Like this:
http://cgi.ebay.com/ebaymotors/LS1-N...item35b4021c89
Make sure the one you buy is for 00-02 DBW, not 03-07 DBW.
To use the 01 DBW TB, you have to have the TAC from a 00-02 as well, which can be kind of hard to find.
Well when the engine was pulled from the doner vehicle it had a crack in it so I had a chance to snag a 07 but with cable instead of drive by wire!
I'm sorry drive by wire instead of cable I appreciate all the help!