Freshly done 862 heads-- ported/polished/milled

Had these heads done last year, have been sitting on a shelf ever since. (Do not come with the valve covers pictured...midwest grabbed those already)

These were done by the same guy that did Lambo's heads, but these have a little more work on them (he never gave me flow numbers on them, so I'm going off what I was told)

Heads were ported/polished/milled down ( .020 I believe)
Have a brand new set of Comp Cam dual springs with titanium retainers
Received a 3 angle valve job and cut to fit bigger valves (Intake Valve Diameter: 2.00 inches
Exhaust Valve Diameter: 1.55 inches)

I have a brand new set of chromemoly 7.350 pushrods for these to use with a stock base circle cam to compensate for the milling.


Selling these for down payment on a house. Not 100% sure what they are worth, just know what I have in them.
I can take more/better pics for anyone who is interested. These were taken real quick with my cell...figure everyone knows what heads look like.

I would like to get $1400 shipped out of these, I will accept paypal, won't charge extra for the fees.

http://a7.sphotos.ak.fbcdn.net/hphot..._1089764_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphot...6_993121_n.jpg

You do realize these are more expensive than a set of PRC's or Patriot's right? Like I have $1150 in my Patriot LS6's, that's including being worked over again by hand, new valves and dual Patriot Extreme springs.

I realize that. At the time I got these, the PRCs and Patriots were a bit more money and most have a much higher compression ratio, which is why I went this route. These are a better option for guys trying to stay N/A. 243 based heads were just too low compression for what I was trying to do.

I'm open to offers, just figured I would start at what I had into them, especially since shops around here wanted around 1000 just for the machine work these have done. That doesn't include springs/valves/heads themselves. I'm sure there are heads for sale cheaper then these, and there are surely heads going for much more. Lambo has been down some pretty decent numbers with relatively small mods, so I'm assuming these heads flow pretty well.

Glwts, theyve been worked more than my heads i know that, you should try to find a flow bench and get the numbers, might help with the sale....idk

1250?

1k...need these gone asap, make offer if you're interested

ttt

whats the lift on the springs? what brand valves? pics of port work on intake and exhaust side?

were you installing these on a 5.3 or 6.0

Springs are good to .625 lift, believe they were Manley valves. The machine shop purchased though, so I'm not 100% sure. I was PLANNING on a N/A 5.3 at the time the heads were done, but they should work on a 6.0 no problem.

http://a3.sphotos.ak.fbcdn.net/hphot..._8159609_n.jpg

http://a5.sphotos.ak.fbcdn.net/hphot..._4992709_n.jpg

http://a4.sphotos.ak.fbcdn.net/hphot..._5136216_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphot..._6732859_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphot..._1374603_n.jpg

http://a2.sphotos.ak.fbcdn.net/hphot..._4470824_n.jpg

900...

http://cgi.ebay.com/ebaymotors/ws/eB...%3AMESELX%3AIT

bump...since someone from canada was a Dbag and bid on the auction, then never payed

i think youre better off selling the double springs separately. those heads have hardly any port work done. why does the exhaust port look like a stop sign?

b/c its a shitty pic taken with a camera phone? Pretty sure gasket matching makes the port the shape of the gasket, not a stop sign, but thanks for your opinion, almost as useful as frenchy for bidding on these, and never paying.

Quote:

---

Originally Posted by oleshifty

b/c its a shitty pic taken with a camera phone? Pretty sure gasket matching makes the port the shape of the gasket, not a stop sign, but thanks for your opinion, almost as useful as frenchy for bidding on these, and never paying.

---

A camera cant make something thats round look not round, no matter how terrible the camera is. Just saying.

ive seen the heads and was there when they were being worked, there is nothing wrong with them, same guy did my heads and im pretty sure i'd now by now if there was a problem.

http://a3.sphotos.ak.fbcdn.net/hphot..._7756668_n.jpg


I mean.... for HAND PORTING, think that's pretty round