2004 Silverado RCSB build...

I sold my '03 Ford Lightning DSG w/ full mods two months ago. I bought 2004 Silverado RCSB last month(Dec. 2010) ago-56K miles, Very clean and no dent, scratch. 5.3. 3.42-Volant CAI, Hooker header LT, Corsa muffler w/4" Stainless Tips, Rear Shackle, American Racing rims 20' and Falken Ziex, I forget something more lists on truck. This truck is for my project for build 6.0 370, 80E tranny and front mount turbo. I already found 6.0 engine and 80E tranny. Still search for turbo PT88 or Borg warner S400 or S480. I don't need to hurry up. If ya don't understand clear on my sentences. I try do my best i can. Because I'm hearing impaired(deaf). Thumb up. I'll be posting more images and updates. Here pics. :thumb:
I been search for different brand name turbo for compare. I think I getting turbo Borg Warner S400SX 80MM T6, 1.10a/r and KB racing's kit.

I decided what i want for 6.0 370ci and will use 317 heads.

-Wiseco Forged LS1 Piston Set: 4.030' Bore, 3.622' Stroke, 6.125'
Rod Length, 1.300' CH, -11cc Dish; Includes Wrist Pins & GFX
Steel Top/Napier Second Ring Set

-Callies Compstar 6.125' H-beam Connecting Rod

-Cometic LS1 Multi-Layer Steel Cylinder Head Gasket, Per Gasket,
4.035 Bore, .045 Thick

-ARP 12 Pt. Head Stud Kit
-ARP Main Stud Kit for LS1/LS6

-Clevite LS1 H Rod Bearing, Per Bearing
-Clevite H Main Bearing Set, For LS1 Stroker

- cam-22X/22X-, 11X LSA.
- Do need to put new all Hardend push rods, lifters, springs?? what else ?? I try to remember what else.
-High volume oil pump

-4L80E stock-Transgo, Circle D 3200 multi disk or single. I not sure which one.
-Crossmember

- Fuel system- Need to figure out what to do with a fuel pump twin 255 and 60 or 80lbs fuel injectors.

I think that's all. but I not sure if need more list what i have lists here for 6.0 and 80E.

http://i673.photobucket.com/albums/v...2/P1030159.jpg
http://i673.photobucket.com/albums/v...2/P1030163.jpg
http://i673.photobucket.com/albums/v...2/P1030164.jpg
http://i673.photobucket.com/albums/v...2/P1030165.jpg
http://i673.photobucket.com/albums/v...2/P1030167.jpg
http://i673.photobucket.com/albums/v...2/P1030168.jpg
http://i673.photobucket.com/albums/v...2/P1030169.jpg
http://i673.photobucket.com/albums/v...2/P1030170.jpg
http://i673.photobucket.com/albums/v...2/P1030172.jpg
http://i673.photobucket.com/albums/v...42/photo33.jpg
http://i673.photobucket.com/albums/v...2/P1030173.jpg
http://i673.photobucket.com/albums/v...2/P1030175.jpg
http://i673.photobucket.com/albums/v...2/P1030176.jpg
http://i673.photobucket.com/albums/v...2/P1030178.jpg

welcome to the site, nice looking truck you got there

Truck looks good man should be a good project you been a member since 2008 you gotta get some posts in bro :lol: hope we can help you out since you came from the dark side :lol:

Welcome. I'm sure whatever you type will be better than some of the garbage people try to pass off as English around here. At least you have a valid excuse. Nice looking truck and good luck with the build. We'll help all we can.

good looking truck. good luck with the build.

Looks like a good start, welcome to the site.

Welcome to the site, looks like your truck has some good potential. Nice and clean.

Thanks guys!! I am back now. I will posting images and updates. Soon I go to get 6.0 and 80E this weekend or next week. Right now i'm looking for turbo Borg Warner S400SX 80MM.

I talked to Mike Turbo. He would go with a borg warner as they are tougher turbos with more efficient extended tip compressor wheels. S400SX 75mm t6 1.10a/r is $800.00 S400SX 80mm T6 1.10a/r is $950.00. What ur opinion ?? Is T6 will fit in ??
http://i673.photobucket.com/albums/v...ng542/s480.jpg

http://i673.photobucket.com/albums/v...ng542/s400.jpg

Has anyone buy products from Mike Turbo (http://miketurboinc.com/)?? Is their service good or bad?? I just want to know before I want to buy their product(s). Thank you.

I don't know of anyone who has personally dealt with them. For the size turbo you are looking at, a LOT of people are using the MP76 from Masterpower. When it comes to turbos, I haven't seen very many people (in the 6 years I've been into this hobby) that has had issues with one breaking.

Gotcha. awesome. I been search for different brand name turbo for compare. I think I getting turbo Borg Warner S400SX 80MM T6, 1.10a/r and KB racing's kit.

I decided what i want for 6.0 370ci and will use 317 heads.

-Wiseco Forged LS1 Piston Set: 4.030' Bore, 3.622' Stroke, 6.125'
Rod Length, 1.300' CH, -11cc Dish; Includes Wrist Pins & GFX
Steel Top/Napier Second Ring Set

-Callies Compstar 6.125' H-beam Connecting Rod

-Cometic LS1 Multi-Layer Steel Cylinder Head Gasket, Per Gasket,
4.035 Bore, .045 Thick

-ARP 12 Pt. Head Stud Kit
-ARP Main Stud Kit for LS1/LS6

-Clevite LS1 H Rod Bearing, Per Bearing
-Clevite H Main Bearing Set, For LS1 Stroker

- cam-22X/22X-, 11X LSA.
- Do need to put new all Hardend push rods, lifters, springs?? what else ?? I try to remember what else.
-High volume oil pump

-4L80E stock-Transgo, Circle D 3200 multi disk or single. I not sure which one.
Crossmember

- Fuel system- Need to figure out what to do with a fuel pump twin 255 and 60 or 80lbs fuel injectors.

I think that's all. but I not sure if need more list what i have lists here for 6.0 and 80E.

Everything looks good to me.

I got 6.0 engine and 80e. I will put some pics. I can't use the bellhousing bolts on the motor stand. I'll have to buy longer bolts to put it on a motor stand. I don't know the size of the bolts through and what brand name bolt won't get break or bend. Anyone know what size of the bolts ??

Here some pics

http://i673.photobucket.com/albums/v...19279-0010.jpg
http://i673.photobucket.com/albums/v...19283-0014.jpg
http://i673.photobucket.com/albums/v...19283-0015.jpg
http://i673.photobucket.com/albums/v...19286-0019.jpg

Anyone ?? Do know what size engine stand bolt ???

WOW! No one help me ZERO! dang! lol.

Usually what I use is just some old bolts that are laying around, I think mine is currently held up with starter bolts, seems to work just fine.