Anybody used this kit in a truck? Just wondering if it will fit an LS6 going into a '99 RCSB 2wd truck.
GM 19212593
http://sdparts.com/details/gm-factor...parts/19212593
Printable View
Anybody used this kit in a truck? Just wondering if it will fit an LS6 going into a '99 RCSB 2wd truck.
GM 19212593
http://sdparts.com/details/gm-factor...parts/19212593
Anybody?
Visually it looks to me like it would work.
That looks like the truck pan.
I bet ya most guys just use the truck pan for ls in most muscle cars. So yeah that's probably what that is.
I know the Camaro(F-Body) pan fits perfect in a OBS LS install.
I'd use the camaro fbody pan, the truck pan is too low, may cause issues.
here is one, gm hi tech just called it an ls1 oil pan in their latest issue, so i'm assuming it's an fbody pan.
it show dimensions as well, http://www.jegs.com/i/GM+Performance...12593/10002/-1
ls oil pan
thats the same one in the first post just expensiverQuote:
Originally Posted by farmtruc
this shows quite a few options for oil pans
http://www.s10forum.com/forum/f213/l...f-them-324366/
If you're putting an LS engine into a 99+ truck why not just use a 99+ truck oil pan? They can be found cheap on ebay, much cheaper than the f-body pan.
Exactly what I did. Found a brand new take-off for $49. Thanks!Quote:
Originally Posted by low91
I've read several threads stating to apply rtv to the 'corners' when installing a new gasket (I bought a Felpro). Kind of vague. Are we talking about the 4 most outward corners of the pan or every bend/corner? Top and bottom of gasket? Apply how long of a bead away from the corners? I really only want to do this once. lol. Any specfic rtv? As usual, thanks in advance!
only on the ends. Put a bead in the corner where the gasket meets up with the pan gaskets, about 1/8" diameter will do it.