Stage 1 kit, 1800.00 Slightly used.

Printable View

12-06-2010, 06:53 AM
Trick1

Stage 1 kit, 1800.00 Slightly used.

Stage 1 turbo kit. Used roughly 100 miles on it since it was installed. 1800.00 OBO
Kit has a MP 70, 44mm blow off, 38mm gate with a 4psi spring.

Kit was installed on my test truck (thats for sale) and never pulled off. We are now returning that truck to stock.

Kit is a good kit, with the addition of an inter cooler could make 550hp. Comes with our swept runner thick wall manifold, 3" downpipe, and 2.5 crossover. The pick below is all the parts that come with this kit.

Down pipe already has a wideband bung welded in..

.

Attachment 3571
12-06-2010, 08:58 AM
chevyboy.520

How much would it cost to add an intercooler?
12-06-2010, 10:17 AM
Frenchy

Best deal ever.
12-06-2010, 10:38 AM
truckinL33

So you're saying for $1800 I can have a turboz on my truck?
12-06-2010, 10:40 AM
chvy=power

it sucks to be broke :(
12-06-2010, 11:09 AM
Trick1

Quote:

Originally Posted by chevyboy.520

How much would it cost to add an intercooler?

I have a water to air core I was going to use, I can let you have with the silicone couplers for another 75.00.
You would still need some other items
Water tank (I can sale a composite tank for 100.00)
water pump
heat exchanger
misc. hoses.

Quote:

Originally Posted by truckinL33

So you're saying for $1800 I can have a turboz on my truck?

Correct. :)
12-06-2010, 11:22 AM
kerrige

How much to add an air to air?
12-06-2010, 11:35 AM
Trick1

You can DIY from ebay for a few hundred dollars.
For us to build one that is a direct bolt in would be 600.00.
We are slammed with a project and will not be able to get to building the IC kit for some time.

I can help up pick out a core if you like.

Rick
12-07-2010, 09:17 PM
chevyboy.520

Is this kit capable of 10psi? If a intercooler was added
12-07-2010, 10:30 PM
bangbangskeetskeet

Quote:

Originally Posted by chevyboy.520

Is this kit capable of 10psi? If a intercooler was added

With an IC it would be capable of more than 10psi.
12-07-2010, 10:34 PM
02CHEV

would this work on a 4wd truck?
12-08-2010, 10:44 AM
BigMac

Maybe we can piece something together. I already have a lot of piping and 4" silicon boots/90's/45's and such from my CAI I fabbed up. I will know after the first of the year what I can do. Right now I would be interested in running 5-7psi (low boost) as a mild upgrade. This is my DD and don't want anything too crazy, just a little boost to move my 7000# truck a little better. I live in Midland, TX so a trip to your shop wouldn't be that bad of a deal for me.

-and the kit will work on a 4wd
12-08-2010, 10:45 AM
ducky

If no one buys this then im going to just to have a spare damn kit laying around. I cant believe this hasnt sold yet..
12-08-2010, 11:27 AM
Trick1

With an intercooler 10psi is doable. Figure the turbo is good for 550-600 depending how hard you want to push it.
Of corse other supporting mods are needing for that type of power.

The kit at 1800.00 is a killer deal. And I have a set of NEW 48lb Bosch injectors for 250.00.
Want the deisel exhuast that's 300.00

some one buys all that and there could be some free stuff thrown in. Not saying what but you could use it. ;)

so at 2350.00 plus freight alls you would need is a tune. Lots of
people floating around probably get that free. Lol

throwing it out if you want a good kit let me know.

Right now we are not taken in any new kit orders or special builds. Slammed with a project that will have tied up for awhile.
12-08-2010, 01:15 PM
bangbangskeetskeet

Quote:

Originally Posted by Turbo6.0L

With an intercooler 10psi is doable. Figure the turbo is good for 550-600 depending how hard you want to push it.
Of corse other supporting mods are needing for that type of power.

The kit at 1800.00 is a killer deal. And I have a set of NEW 48lb Bosch injectors for 250.00.
Want the deisel exhuast that's 300.00

some one buys all that and there could be some free stuff thrown in. Not saying what but you could use it. ;)

so at 2350.00 plus freight alls you would need is a tune. Lots of
people floating around probably get that free. Lol

throwing it out if you want a good kit let me know.

Right now we are not taken in any new kit orders or special builds. Slammed with a project that will have tied up for awhile.

I want to snatch this up SO badly. If I could make it work with LT's or find a drivers side manifold...
:argg: This has me so tempted!
12-08-2010, 05:29 PM
Trick1

Not sure. I will look tomorrow and see if the clearance is there. Its been a little bit since I was under the truck. LOL
12-08-2010, 05:39 PM
Trick1

Quote:

Originally Posted by bangbangskeetskeet

I want to snatch this up SO badly. If I could make it work with LT's or find a drivers side manifold...
:argg: This has me so tempted!

Sorry no LT stuff, and manifolds are pretty easy to find at salvage yards. :)
12-08-2010, 06:28 PM
sprayedenali

Quote:

Originally Posted by bangbangskeetskeet

I want to snatch this up SO badly. If I could make it work with LT's or find a drivers side manifold...
:argg: This has me so tempted!

i have a drivers side manifold ill sell you... $500!
12-09-2010, 01:39 AM
kerrige

http://www.jegs.com/i/Dorman+Product...4-522/10002/-1
http://www.jegs.com/i/Pace+Setter/766/70-1320/10002/-1
http://www.summitracing.com/parts/SUM-G9048/
http://www.summitracing.com/parts/RNB-674-522/
take your pick travis lets see what the old girl is capable and just how broke you can get hahahahahahaha
12-09-2010, 09:08 AM
Trick1

There you go. That plus the kit and someone is on there way. ;)
12-09-2010, 09:10 AM
bangbangskeetskeet

It's just not in the cards as of right now. Maybe one day but I just can't right now. O really wish I could but it's just not happening.
12-09-2010, 10:37 AM
C-WAY

Interested in any trades? I have a 66mm Industrial injection performance turbo built with only 500 miles on it, and have 1800$ invested into it. Thought about putting it on my truck but Im not sure yet, came off of an 04 24v cummins pushing 30ish psi and 600rwhp
12-09-2010, 11:09 AM
kerrige

welll

Quote:

Originally Posted by Turbo6.0L

Right now we are not taken in any new kit orders or special builds. Slammed with a project that will have tied up for awhile.

This is never really a bad thing........sounds like business is pretty good. Maybe time to expand? :ugh2:

congrats and dang i wish i had a truck and the money to do this.
12-10-2010, 12:24 PM
Trick1

Quote:

Originally Posted by C-WAY

Interested in any trades? I have a 66mm Industrial injection performance turbo built with only 500 miles on it, and have 1800$ invested into it. Thought about putting it on my truck but Im not sure yet, came off of an 04 24v cummins pushing 30ish psi and 600rwhp

Sorry no trades.
12-21-2010, 06:38 PM
07classic

pm'd
12-27-2010, 12:32 PM
Trick1

Kit is still up for sale.
12-27-2010, 01:49 PM
07classic

pm'd
02-09-2011, 12:54 AM
02CHEV

is this kit still forsale?
02-09-2011, 07:49 PM
TATERNATOR

hmmmmm this is what I need
02-09-2011, 09:06 PM
Trick1

Hey guys This kit is sold. If there's enough interest I can put a group but together.
5) people I will build the kit as seen here for 1800.00 plus freight.
OR
5) people I will build this kit with mandrel bent crossover and down pipe for 2000.00.

Prices do not include freight. And require a small deposit of 700.00. Balance due when product ships.

Whacha think?

Rick
02-09-2011, 10:59 PM
BigMac

I think it sounds like a great idea.
02-09-2011, 11:00 PM
02CHEV

id def would be intersted in the kit with mandrel tubing.
02-09-2011, 11:20 PM
Beatdown Z

Quote:

Originally Posted by 02CHEV

id def would be intersted in the kit with mandrel tubing.

X2

What brand BOV and wastegate do you use?
02-10-2011, 10:14 AM
Trick1

Right now I have 3 or 4 turbo concepts 38mm gates in stock and no name 44mm blow-offs. Mandrel bent is very doable.
We just need to get 5 people on board and everyone can start boosting. :)
02-10-2011, 10:20 AM
02CHEV

i just have to wait for my taxes to come back then i can put down some $$$ for the kit
02-10-2011, 12:42 PM
Trick1

http://www.ls1truck.com/forums/showt...720#post411720