Printable View
Anyone running it on there truck?hows it perform?
ASA Cam
specs I: 226 E: 236
I: .525 E: .525 110 lsa
then theres the Ls stage 2
LS Stage 2 Cam
I: 227 E: 239
(1.7 rocker) I: 551 E: 551
108
Max lift with 1.8 rockers .583/.583
stage 3
Enlarge image [+] 88958723
LS Stage 3 Cam
I: 233 E: 276
(1.7 rocker) I: 595 E: 595
107
Max lift with 1.8 rockers .630/.630
all from gm performance parts :)
I have seen the ASA cam in a 4.8 it doesnt start making power until 4k and up. Get a custom cam for the 6.2 BRO
im running the 6.0 ly6,3200 stall,4.56 gears
None of them have enough lift, they're all meant for Corvette's.
that small lift made 50 extra hp on a ls3
Oh I didn't say they were bad performers at all, you can just do a lot better. Besides even when I had my discount on GMPP stuff they were overpriced. There's a few more than those four though
I thought you already got a new cam for that 6.0? You gonna stay N/A or was there some FI in the future?
no im waiting on Allen for my custom specs :),i wanna spank some local L ass all motor.
Gotcha. Im willing to bet that with the right cam, you can take a lightly modded L, as long as you can still pull up top. Those Fords have a strong midrange, but seem to run out of breath. Depends on the pulley and total mods, I suppose
lets just say i have to run a 12.5 or better to get em....im full bolt ons 6.0/4.56s/3200 stall
Where are you at right now? The SSS guys seem to really like the 228R in the LQ9 but if you aren't worried about daily driving I'd say a TQv2 or maybe even an MS3 would be alright. I'm planning on a TQv2 for my truck because I already have a 3200 stall and really open exhaust plus I'm going to drop on a FAST 102/102 for the trucks.
have no idea where im at.ive got the ly6 6.0 with l92 heads
I'm sure whatever he specs will be as good as, if not better, than most off the shelf grinds. Especially since you're running L92's.Quote:
Originally Posted by STUNNA
There may actually be some Comp LSR grinds that would work well for you...
i know im ready for them specs.cant wait
Im sure Allen's gonna put you right where you want to be, good luck