Printable View
If you have the smaller radiator in your 09-04 1/2 ton truck and want to go electric fans these will drop right in. You do not have to zip tie some other fans through your core, or build mounting brackets.
Econo with dual 12" curved blade puller fans are 160.00 + freight.
We also can build these with dual 14" fans, and have a race version. Race version starts at 325.00..
http://www.trickperformanceproducts....12econo_lg.jpg
if you could build a harness to tie them into the pcm like others sell and include at that price, you would probably make a fortune. lol
Are you gonna be stocking these???
I REALLY need efans and this is a damn good price.
i agree with everything above...
You have these to bolt on to OBS 5.7 radiator?
i wanna come look at these rick, i might grab em up from you
Quote:
Originally Posted by Old Nash
and go broke trying to make a fortune as well. :)Quote:
Originally Posted by Trevor
There are so many harness people out there right now, we are looking at it but I like the simple turn the key and the fans are on. lol
Yes we are looking at stock a set of these. 'Quote:
Originally Posted by bangbangskeetskeet
We can build a larger set using 14" fans if customers want that. Adds 25.00 to the build.
Not at this time, if your truck is down, and want to send me a radiator I would be more them happy to build you a set.Quote:
Originally Posted by Old Nash
Hey Ryan should be around later tonight give a shout they are bolted to the truck right now, but we could take them off, got the wrench already setting there. :) Seeing how your local no freight..Quote:
Originally Posted by banker099
need some installed pics. And pm me and explain how ya wire it up to come on with the key the correct way lol. Also Shipping to 30417?
sorry i didnt see that msg till just now, is that just a flat piece of alum or is it an actual shroud like the ones trey has?Quote:
Originally Posted by Turbo6.0L
These new set ups are reinforced flat. The older shroud type just cost too much to make. Had to revamp the build process to make it more cost effective. It also saves about 2 inches on the depth side of things.
man that looks good what fans are those cause they look even thiner than the ones that are on my truck
Yours are Spal hi performance these are not. This is about 3.5 inches thinner then your set up. What about that IC stuff whatcha figure out.
i think for now im going to patch the air to air and try and move it a little higher up and wait on the air to water for now so i can get caught up on things
Are these plug & play with the harness from Nelson?
Not sure. I don't no What plugs he uses.
So what exactly will be needed to install these on my 02 Sierra? Thx