Printable View
Just got the truck dynoed after I put in a 6.0 lq4 comp 212 218 560 560 115. Had the heads ported. ls6 intake, lts ory. Its an ext cab 2wd. I feel like I should put out more horsepower and torque than this but tell me what you guys think
Attachment 2249
Attachment 2250
Well if it's a lq4 that about right cause it's still going to be a pretty low compression motor
Thats pretty low if you ask me.... I put down 301/280 with a smaller cam on a 5.3 on a mustang dyno with 35" tires
might need a lil work on the tune.
and dyno numbers/ fast on street are 2 different things
The truck is fast on the street i have no complaints there but i just thought it would show up a little more on the dyno
Atomic made it to ls1truck finally.
im always around :D
who ported the heads? the cam is way to small for ported heads, but yeah i agree i figure your numbers would be up around 330 or better
Get a real cam in there!!!!!!!! 228 or bigger IMO
a cam, heads 6.0 (lq4) should be at least 350 to the wheels...imo
The cam is just too small.
I didnt want to go too big on the cam cause this is my dd. But I guess im not really getting the use out of ported heads with the small cam
yea you should be seeing better numbers cus i put down 341 in a 5.3 with cam and longtubes so somethin isnt goin right for ya.