new gauge look

so i finally let my frustration at the amber crap in my instrument cluster get the best of me.
a couple weeks ago, i finally cleared my needles
http://i943.photobucket.com/albums/a...g?t=1270698172


but that just wasn't good enough. for one, there was still amber 'extreme ranges' on the gauges & the needles (although just fine at night) were a little difficult to see in the day. i thought about repainting them white while i had them off, but i decided not to.

today, i had a new idea... make the orange gauge limits red & paint white tips on the needles.
so far, i like it.

here's the difference in color
http://i943.photobucket.com/albums/a...g?t=1270698165

here's the red on the aux gauges
http://i943.photobucket.com/albums/a...g?t=1270698175

and a close-up of the finished needles
http://i943.photobucket.com/albums/a...g?t=1270698169

the shots of the finished gauges lit up didn't turn out at all, so that's all ya get.
i'm swapping the 194 backlights to purples in a few days whenever my bulbs & twistlocks get here. should be really nice when it's all said & done.

the red looks nice

i want blue personally

I like the white tip. I think that even with orange needles the white tip would look sexy.

post some pics once you get the purple leds in. i'm curious to see how those look

thanks, y'all

Quote:

---

Originally Posted by Duct_tape123

I like the white tip. I think that even with orange needles the white tip would look sexy.

---

i actually thought about doing the clear with red tips, but figured i'd try this first

Quote:

---

Originally Posted by jetersaurous

post some pics once you get the purple leds in. i'm curious to see how those look

---

actually, they're the incandescents. for months, i've looked all over for purple LEDs that seemed to be any count & had the right beam spread but couldn't find any, so i'm using the same ones i use in my blinkers.

White tips, woooo wooooooo! I like 'em, can't wait to see a night pic. I think purple is gonna look good.

so the white tips weren't really doing it for me during the day. they just blended in with the numbers. that said, i went with the idea that popped in my head after i'd already got one of the white tips done - red tips.

got them done this evening & so far they're looking better.

i also got my purple bulbs in yesterday morning & it's takin a little bit to get used to, but i like it - definitely like nothing i've ever seen anywhere.


speaking of that... those of y'all who are using the T10 twistlocks from superbrightleds.com - are y'all's not vertical when twisted fully in? when i twist them all the way in til they lock, the base/handle is about 30* off vertical (about the angle of this bar -> / ). that also twists the contacts off the metal so they won't light up unless i untwist them a bit. that would be fine if the plastic back plate didn't have the vertical cutouts for the sockets. if i twist them far enough to be vertical, they fall out & if i twist them far enough to be really secure, the plate won't snap back on. i've almost found a happy medium, but one socket is a real problem. to get it lined up enough to snap the cover, it's too loose to make contact. any suggestions?

Quote:

---

Originally Posted by zebra

so the white tips weren't really doing it for me during the day. they just blended in with the numbers. that said, i went with the idea that popped in my head after i'd already got one of the white tips done - red tips.

got them done this evening & so far they're looking better.

i also got my purple bulbs in yesterday morning & it's takin a little bit to get used to, but i like it - definitely like nothing i've ever seen anywhere.


speaking of that... those of y'all who are using the T10 twistlocks from superbrightleds.com - are y'all's not vertical when twisted fully in? when i twist them all the way in til they lock, the base/handle is about 30* off vertical (about the angle of this bar -> / ). that also twists the contacts off the metal so they won't light up unless i untwist them a bit. that would be fine if the plastic back plate didn't have the vertical cutouts for the sockets. if i twist them far enough to be vertical, they fall out & if i twist them far enough to be really secure, the plate won't snap back on. i've almost found a happy medium, but one socket is a real problem. to get it lined up enough to snap the cover, it's too loose to make contact. any suggestions?

---

:pics: when i switched over to my red ones i had that problem. i just untwisted them enough to contact but not fall out. and as for the black case on the back, i cut bigger openings for the twist locks.

I had to solder LEDs with resistors to a circuit board. :(

so a year later, i reckon i'll update this a little...

back in the fall, i was working with our laser etcher in the shop & got to thinking... we use this to friggin burn into stainless steel - surely i can cut some plastic. so i took my backing plate off the gauges & cut the twistlock holes into circles. fits right over them now at whatever position they happen to be turned in :)

and, as expected, those incandescent purple bulbs burned through their color in a matter of weeks :/ i just left them in there anyway with a orangish-purpley color going on. then, this week, i finally got my new bulbs in... i found some great purple LEDs last fall & have had 1 pair (as a test) that's been in all sorta different places to see where all it'd work as well as the build quality, etc. i finally bought enough for all the bulbs i wanted to convert over & got them installed in the gauges & ash tray this weekend (as well as a bunch in the car). holy crap, they're so much more amazing now!! these gauges look so much better than i imagine when i first came up with this concept. as you can tell, i'm pleased with the outcome! the purple's a nice rich color & the red show up even better now.

all of that build-up & no pics... ain't i just a big bundle of fail?!
i'll see if i can borrow a camera & get some shots to post

Yeah dude, I mean seriously. Don't talk to me about how big her boobs are without showing me a cellphone pic. Weak sauce! Get the damn shutter clickin :lol:

Quote:

---

Originally Posted by Mang213

Yeah dude, I mean seriously. Don't talk to me about how big her boobs are without showing me a cellphone pic. Weak sauce! Get the damn shutter clickin :lol:

---

couldnt have said it better, haha