Need a harness and switch for cutout

Hey guys, my cousin and i are having trouble finding a switch that goes/works with a race ready performance cutout. We called them and they said the switches were discontinued?! So what the heck do you do if you ever need a switch? Can you use a window switch from a truck or something?
I dont kno, ive had this thing for awhile now and this is killing me!
Race Ready Performance Electric Exhaust Cutout Kit-Single
Thanks

I have RaceReady Cutouts. I used the one that is supplied. If not, just use a Momentary rocker style switch...one that rests in a neutral position, then when you push the switch, you have to hold it down and when you release it, it pops back to the neutral position...kinda like a power window switch. Get what I am saying?

http://www.johnnyproducts.com/images...s/RockerSW.JPG

Ok, i was wondering if that type of switch would work. Ill look around tomorrow and see what i can find.
Thanks.

heres a thought. wonder if you can use one of the PCM's outputs to control a relay setup so it would open your cutout for you at WOT and close once that value is no longer true.

this would be something worth looking into

nice idea^^

thats an idea, but when I still had my elec. cutout on my truck i used it like tyler uses his, pull up next to someone and open it up, as if to say thats right bitch you're about to get owned.

Quote:

---

Originally Posted by LamboDoNoMo

thats an idea, but when I still had my elec. cutout on my truck i used it like tyler uses his, pull up next to someone and open it up, as if to say thats right bitch you're about to get owned.

---

Thats what im talking about! lol Thats about the only reason i want to put it on.

Quote:

---

Originally Posted by Quik

heres a thought. wonder if you can use one of the PCM's outputs to control a relay setup so it would open your cutout for you at WOT and close once that value is no longer true.

this would be something worth looking into

---

i thought i was the only one who had thought of that

Quote:

---

Originally Posted by Quik

heres a thought. wonder if you can use one of the PCM's outputs to control a relay setup so it would open your cutout for you at WOT and close once that value is no longer true.

this would be something worth looking into

---

Almost like a WOT switch on a nitrous system, but set up through the PCM?

Quote:

---

Originally Posted by txarkitekt

Almost like a WOT switch on a nitrous system, but set up through the PCM?

---

yea could use the TPS possibly

:duh:

Talked to my cousin today, he picked up a couple of electric window style switched today. Hes going to try them out on his car and see if theyll work, if so he will send me one. I dont kno about wiring it up for WOT, just kinda wanted to open it up so i could hear the cam a little better. Cool idea tho, im not a wiring genius anyway.

you have their old style switch, i use to have one also but they have upgraded to a slightly larger better switch that is illuminated, they also have a wireless add on you could use so you dont have to wire anything

Quote:

---

Originally Posted by raider red

you have their old style switch, i use to have one also but they have upgraded to a slightly larger better switch that is illuminated, they also have a wireless add on you could use so you dont have to wire anything

---

yeah i had seen the wireless one, i might end up using it too.