Turbo Build, 4.8 shortB, built 65e, lots of other stuff!!!
Thats right im selling my whole build (except the truck). Ive gotten kinda put off on the whole thing and want to go back to the way the truck was in High School and have fun with it. If there is something that u remember seeing before ask i might have just forgotten it.
Nothing will be able to be shipped untill i am home (November 11)
Shipping charges not included pm me for more info pickup/drop off my be available
if im not available on here u can email me luketrueheart13@hotmail.com
1) Trick Performance Hot Parts $2800 (turbo not included)
-4 in Down Pipe
-Waste Gate Synapse 50mm
-Cross Over gaskets
-New stock SS silverado drivers side ex manifold
-Oil feed and return Lines
-Timing Chain cover w/ -8 oil return port
-Synapse BOV
http://i25.photobucket.com/albums/c9...8/DSCF1754.jpg
http://www.trickperformanceproducts....1_50mmgate.jpg
http://i25.photobucket.com/albums/c9...e/IMG_0187.jpg
http://i25.photobucket.com/albums/c9...e/IMG_0184.jpg
2) Heads Cam package $700(virgils) or seperate
-317 Heads off the SS w/ PRC dual valve springs (installed Never ran) Precision Race Component Spring Kit $500
-Speed Inc TU2 Cam (turbo) 236-236Dur .587-.587 lift 112.5 lsa (installed never ran) $300
-Custom Grind (bought from virgil ran for a little while in his truck) not 100% sure on specs i knows its in 250-242dur, 630ish lift 114-116lsa in that area and will not run in anyting smaller than a 6.0 $200
-Texas-Speed 7.400'' pushrods (installed never ran) Texas Speed & Performance Chromemoly Pushrods $80
Heads cleaned up
http://i25.photobucket.com/albums/c9...8/DSCF1829.jpg
intake runner
http://i25.photobucket.com/albums/c9...8/DSCF1830.jpg
exhaust runner
http://i25.photobucket.com/albums/c9...8/DSCF1826.jpg
Virgils Cam
http://i25.photobucket.com/albums/c9...e/DSCF1592.jpg
ground in spec # for Virgils cam
http://i25.photobucket.com/albums/c9...e/DSCF1597.jpg
3) Built 4l65e AWD/4x4 no tcase SOLD
5) LS2 intake manifold painted green (no tb) $250
http://i25.photobucket.com/albums/c9...8/DSCF1868.jpg
6) Vibrant Silocon couplers and clamps $150
-4in 90* elbow w/ 2 4in clamps (ic pipe to TB)
-4in-3in adapter w/ 1 4in and 1 3in clamp (ic out to ic pipe)
-3in to 3in coupler w/ 2 3in clamps (ic pipe to ic)
-3in to 2.5in coupler w/ 3in and 2.5in clamp (turbo to ic pipe)
http://i25.photobucket.com/albums/c9...e/IMG_0174.jpg
http://i25.photobucket.com/albums/c9...e/IMG_0182.jpg
More to come btw i will be updating this first post
