Nelson Performace Full Service

Just writting to to let u guys know, how greatfull I am with the Full Service gave to me by this Shop.

Since I'm in a kind of thought situation related to distance, and my knowledge about mechanics and shops at your country is so limited, NP Shop have help from minor details as wiring, to transmission, engine tune and else !!!!!!

Is like "all in one Store" and the time wasted trying to make me understand basics, is priceless.

I'm so happy with the results and my truck, and I know I'm just under 60% to completion (who ever ends a project) I know I can rely on this great team at NP

Just for those in doubt...just break the glass.

:thumb:

I probably live even further away than you, and I'm considering a trip to Allen's shop sometime in the future as well. Maybe next year.

According to Mapquest it would be a 14:32:00 drive at 928 miles for me!

Quote:

---

Originally Posted by DigitalBoy0101

:thumb:

928 miles for me!

---

2500 straight line miles for me :(

Damn Gabe, thanks!

I know we chat almost everyday, but I didn't know you had feelings for me, hehehe, jk man!

thanks and I enjoy it as well,

allen

btw, gabe is in/near costa rica, that's where the 408 from my old truck went, he's loving it!

Quote:

---

Originally Posted by farmtruc

Damn Gabe, thanks!

I know we chat almost everyday, but I didn't know you had feelings for me, hehehe, jk man!

---

Dude, I never mention any names in my post (thought u wanna keep our thing in secret!! LOL)

2 clicks southwest Costa Rica for now (Ecuador)..........still great place for Vacations, But for the all in one vacation I recommend Costa Rica over all

Allen, thats when you know you have an amazing shop and offer amazing services. You have someone customers over in England, Ecuador, and we're helping people in Kuwait here on the site. You've really done a great thing.

Quote:

---

Originally Posted by 2boostedSilverado

2500 straight line miles for me :(

---

Woah.......dude!

You get the trophy :greg:

Quote:

---

Originally Posted by DigitalBoy0101

Woah.......dude!

You get the trophy :greg:

---

no, i do!

Quote:

---

Originally Posted by 2k5Squirrel

no, i do!

---

Agreed, u r way far crossing the big pond, in d old world.....regards.

BTW, thanks for risking so much taking care what we have for granted, our way of living, not only for the US, but for all the continent and great part of the World...Thank you again and God Bless.

Quote:

---

Originally Posted by 2k5Squirrel

no, i do!

---

Ugh, yeah......that marathon plane ride back home was no fun, especially when you're a smoker. They had us quarantined at the USO at each stop with no way to step outside for a smoke. Our last stop in Canada was my first cigarette in almost 18 hours. It's a good thing I had already turned in my weapon or I might have considered shooting someone! Nah, not really, but it added unnecessary stress.

The good thing was, a pretty girl at the USO in Germany made a pass at me :) The bad thing was, she waited until 5 seconds before I had to walk out the door and get back on the plane to do it >.<

Thanks for serving, man! :thumb:

ok service but im not too happy with nelson's product at all. First off it took almost a month to get my harness. Second, I ordered the engine harness and e-fan harnesses assuming that all the accessories plugs and whatnot would be on a complete harness. Wrong! i essentially paid out the ass for a few pieces of wire and some plugs. I had to splice my old factory harness in to make everything work right and im still working out kinks in it. I was not expecting this and it added hours of work to the swap. I was hoping it would be a simple plug and play by ordering it from them. If I had known that it was not a complete harness I would have never bought it from them and I would have either bought from painless or made my own as it would have been cheaper, better and quicker!

Quote:

---

Originally Posted by texasRSTsilverado

ok service but im not too happy with nelson's product at all. First off it took almost a month to get my harness. Second, I ordered the engine harness and e-fan harnesses assuming that all the accessories plugs and whatnot would be on a complete harness. Wrong! i essentially paid out the ass for a few pieces of wire and some plugs. I had to splice my old factory harness in to make everything work right and im still working out kinks in it. I was not expecting this and it added hours of work to the swap. I was hoping it would be a simple plug and play by ordering it from them. If I had known that it was not a complete harness I would have never bought it from them and I would have either bought from painless or made my own as it would have been cheaper, better and quicker!

---

First of all, what is your name so I can look into this?
Is this Alex?

All harnesses go out of here within a week!!!

There was one harness that sat here for a couple weeks, but more on that later.

No, we do not offer an engine harness with fans integrated into it.
We offer an engine harness and we offer a fan harness.

It doesn't matter what harness you buy, if we don't have your stock harness or chassis harness, you have to spice and make things work on your end.
How are we supposed to perform all that without your truck here?

The only two wires we supply, for gauges, are the tach and speedo outputs.
All the other gauges, you're on your own!!
The water temp, the alt gauge, and the oil pressure.

You did get a complete harness, you got a non emissions harness that will run your engine and trans! That is exactly what you ordered!
You also got a fan harness that runs two fans, that are activated by the a/c and pcm.

It sounds like you got into something that was a little more involved.

Swaps aren't just plug and play, there's wiring and more details than I can type.

btw, a painless harness is no where near as easy as ours to install.

shoot me a pm or reply,

allen

i would assume, that if i had bought a wiring harness, it would be, for the most part, just a matter of routing the wires and plugging in everything, thats alot of work in itself. i might expect one or two controls to not have a plug, but the entire harness? anyways, one thing i would surely do is make sure i knew what i was buying.

Quote:

---

Originally Posted by molitor

i would assume, that if i had bought a wiring harness, it would be, for the most part, just a matter of routing the wires and plugging in everything, thats alot of work in itself. i might expect one or two controls to not have a plug, but the entire harness? anyways, one thing i would surely do is make sure i knew what i was buying.

---

it's exactly that, you plug in all the sensor connectors, provide power, ignition and ground, route the power wire to your fuel pump, connect the two pcm connectors to the pcm, and you're done.

the entire harness is complete and has every connector end you need to get your engine and trans running.
there is no extra wiring required unless you're installing gauges or another harness.

it is that easy!

I guess difficulty and ease of installation depends on the installers experience.


btw, should have made a new post about this instead of crapping on this guys thread.

Quote:

---

Originally Posted by texasRSTsilverado

ok service but im not too happy with nelson's product at all. First off it took almost a month to get my harness. Second, I ordered the engine harness and e-fan harnesses assuming that all the accessories plugs and whatnot would be on a complete harness. Wrong! i essentially paid out the ass for a few pieces of wire and some plugs. I had to splice my old factory harness in to make everything work right and im still working out kinks in it. I was not expecting this and it added hours of work to the swap. I was hoping it would be a simple plug and play by ordering it from them. If I had known that it was not a complete harness I would have never bought it from them and I would have either bought from painless or made my own as it would have been cheaper, better and quicker!

---

I still want a straight answer on this, what do you mean :

"that all the accessories plugs and whatnot would be on a complete harness."

what was missing from the engine harness??? it has every connector needed to start the engine.

the more i read this, the more i get upset with your comments, you paid out the ass for a few pieces of wire and plugs, what?!!! you paid for a complete engine harness, that is exactly what you got.

splicing into the harness and making your old harness work with the new isn't covered with purchasing a new harness.

the harness is as simple as it gets, but does require you to actually push the connectors on and wire up power, ignition and ground.

You mentioned this again at the end of your post, so what was incomplete about the harness?????????????????????????????????????

Redheartbeat,

Can you please tell this guy Allen to get out of my post? LOL

Allen,

Dude, everyone have an opinion, as everyone have buttholes..so cross check those.....

For the signature of this guy "ALL BUILD, NOT BOUGHT"...naahhh, c'mon, me been a cosmetologist could install like 4 times my engine, and plug all those miles of cables, just with ur instructions. Now these guy must be lower in the scale of knowledge and craftmanship.

If he want's plug& Play, buy an USB memory stick, and keep surfing the web, and get out of mechanic and motors, seem's like is not ur turff.

And again, each time I decide a proyect, and buy something from nelson performance, BEFORE I purchase, Bugs this guys the hell out of their patience, to just make myself clear of what I'm gonna get.

Kind of a Space mission, here I don't have a second chance, probably u do, but u shold practice my system, works every time...."If I'm so IGNORANT, I always ask until it's water clear"

if he's paying his ass for a couple of harness...maybe is not that worth it. LOL

Back to MY POST, Thanks Again Allen, and hope we can finish soon our 2 new great projects...later dudes !!!

Quote:

---

Originally Posted by texasRSTsilverado

ok service but im not too happy with nelson's product at all. First off it took almost a month to get my harness. Second, I ordered the engine harness and e-fan harnesses assuming that all the accessories plugs and whatnot would be on a complete harness. Wrong! i essentially paid out the ass for a few pieces of wire and some plugs. I had to splice my old factory harness in to make everything work right and im still working out kinks in it. I was not expecting this and it added hours of work to the swap. I was hoping it would be a simple plug and play by ordering it from them. If I had known that it was not a complete harness I would have never bought it from them and I would have either bought from painless or made my own as it would have been cheaper, better and quicker!

---

What exactly do you expect? A harness from Nelson clearly states that it is plug and play. Do you expect him to go over every vehicle with a fine tooth comb from miles away and get every single gauge and electronic thing that you have wired(that he may or may know about, considering the aftermarket)? You DO have to put in a little work to get some of the things going. Not all wiring is going to be identical if you're swapping an engine. Some wires may need to be longer for one person than for another. I'm not trying to be a dick or anything here, but take a little ingenuity and wire the few remaining things yourself.

Quote:

---

Originally Posted by texasRSTsilverado

ok service but im not too happy with nelson's product at all. First off it took almost a month to get my harness. Second, I ordered the engine harness and e-fan harnesses assuming that all the accessories plugs and whatnot would be on a complete harness. Wrong! i essentially paid out the ass for a few pieces of wire and some plugs. I had to splice my old factory harness in to make everything work right and im still working out kinks in it. I was not expecting this and it added hours of work to the swap. I was hoping it would be a simple plug and play by ordering it from them. If I had known that it was not a complete harness I would have never bought it from them and I would have either bought from painless or made my own as it would have been cheaper, better and quicker!

---

I personally build and test every harness that leaves this shop. A engine harness is not built until I speak with the customer. No emissions, no a/c connections, 4 wire hook up, controls engine and transmission only. I always tell every customer these 5 things. I'm curios to find out who purchased this harness also. Feel free to contact me and Mel will come get me out of the shop.

Quote:

---

Originally Posted by Jon@NelsonPerformance

I personally build and test every harness that leaves this shop. A engine harness is not built until I speak with the customer. No emissions, no a/c connections, 4 wire hook up, controls engine and transmission only. I always tell every customer these 5 things. I'm curios to find out who purchased this harness also. Feel free to contact me and Mel will come get me out of the shop.

---

So u r the responsible for my Cam sensor wiring....sweet dude...plug & play all the way.

Thanks u very much...also the pink wire was a nice touch !!! LOL