Im going in put my transgo kit in tomarrow and I have a few questions.
what kind of torque do the valve body bolts get.
do I have to grind the manual valve like it says. Im worryed I may mess it up.
Printable View
Im going in put my transgo kit in tomarrow and I have a few questions.
what kind of torque do the valve body bolts get.
do I have to grind the manual valve like it says. Im worryed I may mess it up.
the valve body bolt torque really love at like 10 or 15 lbs cant remember exactly just make sure the manual valve moves easy in the body..
ok thanks
6-10 ft/lbs is spec for an 04. 15 might break them off.
The kits in. Everything went pretty smooth. shifts nice when in drive but when you take off in first it jumps to second real quick then comes back down to first and I can hold it to any rpm. but it didnt do it all the time. Is it learning or do I need a tune so it will act rite I have a Diablo rite now.
get retune
Thanks man I hope thats what it is.
will it hurt to drive it like this? It shifts fine in drive
How hard was it to install the shift kit? You installed the HD-2, right? I want to install a shift kit and servos, but cannot justify the $300+ install price when I can turn a wrench.
Honestly man it was pretty easy but very intimidating cuz I have never done one. But if u take ur time its not bad.
In your opinion, what was the most difficult part of the install? How long did it take?
nothing was hard about it. took me all day but I didnt work on it steady.