i need an engine harness

Printable View

06-30-2009, 09:55 AM
zebra

i need an engine harness

i know i'm looking for a needle in a haystack, but i really don't want to have to hack up a harness & pray it works.

i need the engine wiring harness for a 99-02 GM 4.8 with a 5 speed manual transmission and manual 4x4 transfer case.

any leads or suggestions will be a great help.

thanks!
06-30-2009, 10:14 AM
Melissa@NelsonPerformance

We can rebuild your harness or we can build a new harness. Please PM me or call us. 210-626-0278
Thanks
mel-
06-30-2009, 01:08 PM
zebra

PM sent & still looking...
07-02-2009, 10:49 AM
zebra

bump for today
07-09-2009, 10:29 AM
zebra

bump for any possible leads
07-13-2009, 01:07 AM
midnight04

I have the harness from my 04 but not a 4x4
07-13-2009, 06:45 PM
zebra

Quote:

Originally Posted by midnight04

I have the harness from my 04 but not a 4x4

so i found out the 4x4 don't make a difference because the only wire going to the transmission is the VSS signal, but the 04s have a different computer & add a plug for the DBW throttle

thanks though!
07-15-2009, 03:34 AM
lechez71

chances are your going to have to get one made from nelson performance. i know someone with an 01 2500hd 4l80e 2wd harness. if it helps any let me know.
07-16-2009, 12:28 PM
zebra

Quote:

Originally Posted by lechez71

chances are your going to have to get one made from nelson performance. i know someone with an 01 2500hd 4l80e 2wd harness. if it helps any let me know.

i would still end up with an extra transmission controller plug to tie out of the way... which was the whole point of trying to find such an oddball harness. i'm a little OCD about stuff just hanging & looking like it don't belong there :smash:

thanks anyway.
07-16-2009, 12:36 PM
RedHeartbeat

Jeeze, remove it from the harness. if you can replace a harness you can cut wires out of one.
07-16-2009, 01:14 PM
zebra

Quote:

Originally Posted by RedHeartbeat

Jeeze, remove it from the harness. if you can replace a harness you can cut wires out of one.

the thing is that i've never done any of this before, so i'll be learning as i go & was just trying to make stuff as easy as possible.
07-19-2009, 03:52 AM
Faze2183

nelson can build/add/rebuild ur harness to ur needs pretty much... hes gunna do our harness for the 36' chevy 2 door that we've been workin on... just tryin to decide on engine/tranny combo
07-19-2009, 03:25 PM
zebra

and it's an extra $450... i barely have the money to fix the truck at all. i'm just gonna try & pull the wiring from the harness... i guess i'll see how hard that'll be when the motor gets here tuesday.